IPadAir2 Wifi is not connected, repair method such as disconnection, decomposition method
iPadAir2 Wifi cable and disassembly procedure
[iPadAir2 Wifi Cable Replacement STEP 1]
If Wifi is not connected, there is also a case of failure on the Wifi router side, but if it does not improve even if you examine variousthings, there is also a problem with the wifi of the iPad side.
If you have initialized after taking a backup once and it is still not improved, you may need to replace the internal parts.
This decomposition method is open to the public to the place where you remove the Wifi cable, so please refer to the target.
When disassembling, be sure to remove the battery terminal (inside) before working.
[iPadAir2 Wifi Cable Replacement STEP 2]
To remove the Wifi cable, you need to remove the LCD, so please check with the LCD replacement.
[iPadAir2 Wifi Cable Replacement STEP 3]
From now on, I would like to disassemble the Wifi cable.
There is one Wifi cable on the left and right, but I want to remove it from the right side.
There are three small screws in the red circle, so I remove them.
The Wifi cable is made like a thin sheet, so I try to use up the spatula like the image.
[iPadAir2 Wifi Cable Replacement STEP 4]
If you can turn a little, you can peel off to a certain place by hand.
Please leave it as it is once if it is possible to peel it off to the image.
[iPadAir2 Wifi Cable Replacement STEP 5]
If you peel it off to the root, do not forget to remove one screw on the back side of the black cushion.
[iPadAir2 Wifi Cable Replacement STEP 6]
The red circle part of the image is where the Wifi cable is connected to the logic board side.
If you try to cause a pin from the bottom, you can easily remove both of them.
The part that is lifted with a spatula becomes a cable, but it peels off because it is fixed to the logic board with tape.
[iPadAir2 Wifi Cable Replacement STEP 7]
Hold the connector tip by hand and pull the cable to the left.
Once you have gone to a certain place, leave it as it is.
[iPadAir2 Wifi Cable Replacement STEP 8]
This is the left part, but basically the process on the right side and the decomposition method will be the same, so remove the three screws first.
[iPadAir2 Wifi Cable Replacement STEP 9]
After peeling off a little, turn it to the vicinity of the root by hand and stop it as it is once.
[iPadAir2 Wifi Cable Replacement STEP 10]
Just like the cable on the left side, one screw is hidden on the back side of the black cushion, so don't forget to remove it.
[iPadAir2 Wifi Cable Replacement STEP 11]
Only the Wifi cable could be removed.
I think that it is not so difficult as decomposition difficulty, so if Wifi is not connected by any chance, I think that it leads to the pursuit of the cause by trying to replace parts once.
iPadAir2 Wifi cable and disassembly procedure
If Wifi is not connected, there is also a case of failure on the Wifi router side, but if it does not improve even if you examine variousthings, there is also a problem with the wifi of the iPad side.
To remove the Wifi cable, you need to remove the LCD, so please check with the LCD replacement.
If you can turn a little, you can peel off to a certain place by hand.
If you peel it off to the root, do not forget to remove one screw on the back side of the black cushion.
コメントを残す