How to repair and disassemble the iPadAir2 when it doesn't listen or react
volume button and disassembly procedure for iPadAir2
[iPadAir2 Volume Button Replacement STEP 1]
If the volume button (switch) is no longer working, the part itself may have failed, and the person who raises the volume may not be able to lower it, and if it does not react at all, parts may need to be replaced.
In addition, in the model before iPadAir2, there was a button to switch to silent mode next to the volume switch, but after Air2, the button itself is lost.
[iPadAir2 Volume Button Replacement STEP 2]
If the volume button itself does not work, the control center is displayed by swiping up from the bottom of the screen once, so please try to operate it there.
If there is no problem on the control center side, a volume button change is required.
[iPadAir2 Volume Button Replacement STEP 3]
The image part becomes a volume button (switch), but the decomposition method up to this point is published by the camera exchange, so please check there.
(The volume button cannot be removed unless the rear camera is removed.))
I think that it is possible to check all screws like the image when it is possible to remove the rear camera.
Four red circles will be the button side, and the orange part will be the connector of the switch, so each screw will be removed.
If you remove the screw of the orange part, you can remove the silver plate, so let's remove it together!
[iPadAir2 Volume Button Replacement STEP 4]
I was able to remove the screw and the plate.
[iPadAir2 Volume Button Replacement STEP 5]
From here, the part itself is removed, but the connector, which is enclosed in orange, is removed first.
You can easily remove the connector from the logic board by lifting it from the bottom to the top.
Let's try to use the spatula like the image around the button!
[iPadAir2 Volume Button Replacement STEP 6]
Only the upper left part is fixed to the side with a light double-sided tape, but you can peel off it if you insert a spatula such as an image into the gap and make it strain.
[iPadAir2 Volume Button Replacement STEP 7]
I was able to remove the volume switch.
If you replace the newly prepared parts and reassemble them with the original procedure, the work will be completed.
volume button and disassembly procedure for iPadAir2
If the volume button (switch) is no longer working, the part itself may have failed, and the person who raises the volume may not be able to lower it, and if it does not react at all, parts may need to be replaced.
If the volume button itself does not work, the control center is displayed by swiping up from the bottom of the screen once, so please try to operate it there.
I was able to remove the screw and the plate.
From here, the part itself is removed, but the connector, which is enclosed in orange, is removed first.
コメントを残す