iPad Mini 4 Speaker Replacement Repair and Disassembly Method 13 steps

How to repair and disassemble the iPad Mini 4 when you don't hear or hear it

[iPad Mini 4 Speaker Replacement STEP 1]: The iPadMini4 has two speakers, but if you hear a sound crack, there is a possibility of speaker failure.
In order to remove the speaker, it is necessary to remove the liquid crystal, but since the liquid crystal is fixed with double-sided tape, heat is applied to the red part and peeled off.
If you can add heat, it will be easier to work with suction cups, vacuum lifters, etc.
It is not difficult as a decomposition if you can remove even the liquid crystal, so please try to challenge!

[iPad Mini 4 Speaker Replacement STEP 2]: If you can float the liquid crystal even a little, the work efficiency will be improved if you try to insert a pick etc. into the gap, but please be careful because there is a possibility that you will break the screen if you try to push it forcibly.

[iPad Mini 4 Speaker Replacement STEP 3]: When the liquid crystal floats to some extent, it is possible to lift it like an image, and be sure to lift it from the top (camera side) at this time.
In addition, there is a home button and cable relationship on the lower side, but the home button of the iPad Mini 4 has fingerprint authentication, so please be careful because you will never be able to use fingerprint authentication again if you break it by any chance.
Even if you break it by any chance and perform a home button exchange, the function of fingerprint authentication is paired with the main body side, so you can only use the "normal button" without fingerprint authentication.

[iPad Mini 4 Speaker Replacement STEP 4]: It is a scene seen from the front by causing a liquid crystal.
Because there is a connector of the liquid crystal in the lower right part, I will decompose it.

[iPad Mini 4 Speaker Replacement STEP 5]: There are three red frames in total, but the leftmost side is the connector of the battery, so please remove it first.
It is a way to remove, but you can easily remove it by using the tool (plastic) and lifting it upward from the bottom.
If you can remove the connector of the battery, let's remove the connector on the liquid crystal side (middle, right side) in the same manner.

[iPad Mini 4 Speaker Replacement STEP 6]: Now it was possible to separate the body side and the liquid crystal side.

[iPad Mini 4 Speaker Replacement STEP 7]: Because there is a Wifi cable on the speaker, I will remove it first, but since the connector of the red frame part is a connector of Wifi, Remove the connector from the bottom to the top.

[iPad Mini 4 Speaker Replacement STEP 8]: When the connector can be removed, it will only be fixed with tape, so it can be easily peeled off to some extent.

[iPad Mini 4 Speaker Replacement STEP 9]: It becomes the Wifi part, but let's remove all because there is a screw in the place that is surrounded by a red frame!
There is a speaker below this.

[iPad Mini 4 Speaker Replacement STEP 10]: Because it is fixed with a screw to the dock connector part, i remove it.

[iPad Mini 4 Speaker Replacement STEP 11]: Because the cable is inserted just below the screw of the previous, it can be easily removed if it pulls it out after pulling it out after causing the pin.

[iPad Mini 4 Speaker Replacement STEP 12]: I was able to remove one of the speakers.

[iPad Mini 4 Speaker Replacement STEP 13]: It becomes the speaker of the opposite side from the previous, but it is possible to remove it easily in the same manner as before.