MacbookProRetina A1502 does not start, is slow, heavy, repair method, disassembly method
MacbookProRetina A1502 (13 inch) SSD replacement does not start, does not proceed from the apple mark
[MacbookProRetina A1502 SSD Replacement STEP 1]
If you do not proceed from the apple mark and do not start normally, the SSD may have failed, so you may need to replace the SSD.
Because the shape of the Retina model SSD has become special, it is not possible to easily purchase it at a consumer electronics retailer, but if you can prepare parts, you can easily replace it, so please refer to it.
If you turn the inside out of the main body, there are 10 screws in total, so i will remove it, but please prepare a special screwdriver because the screw can not be opened with a Phillips screwdriver because of the special shape.
[MacbookProRetina A1502 SSD Replacement STEP 2]
When you can remove the back of the main body, you can see the SSD, but we will work to remove the battery connector from the main unit first.
If you remove the SSD without doing this, there is a risk of shortcircuit, so be sure to do so.
Turn over the seal of the red frame and you will see the part where the battery connector is connected to the logic board.
[MacbookProRetina A1502 SSD Replacement STEP 3]
You can easily remove the connector if you try to wake it up from the bottom.
[MacbookProRetina A1502 SSD Replacement STEP 4]
It becomes an angle from the side, but it is safe to leave it as it is because it becomes such a state when the connector is removed.
[MacbookProRetina A1502 SSD Replacement STEP 5]
The horizontal parts in the image are SSDs that are removed this time.
Because it is fixed with one screw, it is removed, but this part also requires a special screwdriver.
[MacbookProRetina A1502 SSD Replacement STEP 6]
If you can remove the screw of the previous, you can easily remove it if you let the SSD be held by hand.
MacbookProRetina A1502 (13 inch) SSD replacement does not start, does not proceed from the apple mark
It becomes an angle from the side, but it is safe to leave it as it is because it becomes such a state when the connector is removed.
コメントを残す