Additional memory of the Macbook A181, how to repair if it does not start, and how to disassemble it
How to replace parts when the Macbook A1181 does not start, does not have an apple mark, or has a folder mark
[Macbook A1181 Memory Replacement STEP 1]
If you want to add more memory to your Macbook, or if your memory fails, this method of disassembly will be helpful.
Since there are two slots in A1181, it is possible to point to up to two memory.
As the work difficulty level, it will be about 1 out of 5 stages, so I think that it is possible to easily replace the memory, so please try to challenge by all means.
[Macbook A1181 Memory Replacement STEP 2]
Since the memory is stored in the place where the battery was removed, i will remove the battery first.
There is a round part right next to the battery, but it is possible to remove the battery easily if you insert a coin or the like.
[Macbook A1181 Memory Replacement STEP 3]
I think that it becomes the state of the image when it is possible to remove the battery- but it loosens because the screw is attached to the red frame part.
The screw of this part is not completely come off, but if it is possible to loosen the screw until full opening, it comes to come off each plate of iron.
[Macbook A1181 Memory Replacement STEP 4]
I was able to remove the iron plate, but the memory is hidden inside this.
[Macbook A1181 Memory Replacement STEP 5]
The memory is hidden inside the iron plate that I removed earlier.
If you push the knob of the orange part toward the arrow, it is possible to remove it because the memory comes out in front.
Now that it is completed as a work process, it is completed if you reassemble the newly prepared memory by the original procedure.
It takes about five minutes as long as it takes.
コメントを残す