How to repair and disassemble if the Trackpad on macbookAir doesn't work or can't be hit
Repair if the trackpad cannot be clicked or does not work
[MacbookAir A1370 Trackpad Replacement and Decomposition Method STEP 1]
If the trackpad malfunctions, cannot be clicked, or the battery has expanded and the trackpad is broken, replacement is required.
Also, if the keyboard suddenly becomes unresponsive, the trackpad may cause it to stop working, and the keyboard cable is connected to the trackpad.
[MacbookAir A1370 Trackpad Replacement and Decomposition Method STEP 2]
We have started from the place where the battery is removed, but please confirm the decomposition process so far by replacing the battery.
[MacbookAir A1370 Trackpad Replacement and Decomposition Method STEP 3]
I think that It was able to confirm that there is a trackpad under immediately when the battery can be removed.
Two wires are connected to the trackpad, but the red frame is connected to the trackpad and the logic board.
It is possible to remove the cable easily by lifting the nail of the connector to 90 degrees and then sliding the wiring, but it is rare that this wiring becomes useless and the trackpad does not work.
Of course, if you make it break or scratch, even if you incorporate MacbookAir, the trackpad will not work, so be careful.
[MacbookAir A1370 Trackpad Replacement and Decomposition Method STEP 4]
Next, the cable on the keyboard is woven and connected to the connector on the back of the trackpad, so carefully lift the pin to 90 degrees and pull out the cable.
Note that if you damage the cable side during this task, the keyboard will not work.
[MacbookAir A1370 Trackpad Replacement and Decomposition Method STEP 5]
Since the top case of the trackpad and the main body is secured with a small screw, remove all six Phillips screws in the red mark part, but a thin driver at the tip is required.
[MacbookAir A1370 Trackpad Replacement and Decomposition Method STEP 6]
If you remove all the cables and screws, the trackpad removal will be completed, so when replacing with a new one, carefully return it with the reverse procedure!
Trackpad is not a part that breaks down very much, but it is a part that breaks down considerably when it is made to be submerged.
In the case of manufacturer repair, not only the trackpad replacement, but also a very high repair fee will be charged to become a TOPCASE replacement.
Repair if the trackpad cannot be clicked or does not work
コメントを残す