How to repair or disassemble the iPad Mini 3, how to repair it, such as battery expansion
battery replacement and disassembly procedure sipad Mini 3 all 25 steps
[iPad Mini 3 Battery Replacement STEP 1]
To remove the battery of the iPad Mini 3, you need to remove the LCD glass and panel, so I would like to remove the battery after removing it first.
It is possible to remove the battery without removing the liquid crystal completely, but it is easier to disassemble if you remove both (glass, panel).
[iPad Mini 3 Battery Replacement STEP 2]
The liquid crystal glass is only stopped by a strong double-sided tape in the main body, and there is no screw at all.
However, because double-sided tape is very powerful, it is easy to disassemble by using the tool (heat gun) in the image.
Heat gun is a thing like a powerful dryer, and the internal double-sided tape is weakened by applying heat to the place which is enclosed in a red frame by this.
[iPad Mini 3 Battery Replacement STEP 3]
It peels off the glass after applying heat, but it is necessary to be careful because it breaks when pulling forcibly and it becomes a high repair price.
If it seems to be a little hard, apply heat again and peel it off.
[iPad Mini 3 Battery Replacement STEP 4]
If it is able to peel off overall, it will be able to lift the glass.
[iPad Mini 3 Battery Replacement STEP 5]
When the glass is peeled off from the main body, it becomes such a state, but it cannot be removed because the connector is still connected internally.
[iPad Mini 3 Battery Replacement STEP 6]
To remove liquid crystal glass (digitizer), it is necessary to remove the liquid crystal panel in the decomposition process.
The red circle part of the image is a screw that secures the panel, so try to remove the Phillips screwdriver.
There is a gray sponge on the right side of the image, but when you peel it off, you can see the screw.
[iPad Mini 3 Battery Replacement STEP 7]
The screw above is on the upper side, but this is the lower side.
Depending on how the glass is peeled off, the screw may be hidden with tape or magnet, but I think that it is easy to understand because it is in the same part as the screw removed by STEP6.
[iPad Mini 3 Battery Replacement STEP 8]
It is a hidden screw.
[iPad Mini 3 Battery Replacement STEP 9]
Instead of removing the LCD panel as soon as the previous screw is removed, it is a place where black tape is peeled off using a tool though it peels off because it is stopped even with the tape.
[iPad Mini 3 Battery Replacement STEP 10]
The tape is peeled off in this way.
[iPad Mini 3 Battery Replacement STEP 11]
The tape above is on the left side, but let's peel off the tape in the same way!
[iPad Mini 3 Battery Replacement STEP 12]
I was able to peel off the tape.
[iPad Mini 3 Battery Replacement STEP 13]
If four screws and tape can be peeled off, it will be possible to cause a liquid crystal panel, but be careful because it will crack if you try to cause a liquid crystal panel at once because light double-sided tape is attached to the side of the liquid crystal.
Insert a tool such as a spatula and try to wake it up little by little.
[iPad Mini 3 Battery Replacement STEP 14]
If you can completely cause the liquid crystal, please knock it down to the glass side as shown in the image.
[iPad Mini 3 Battery Replacement STEP 15]
The heat shield is drawn in this way under the panel above.
There is a small screw in the red circle part, so let's remove all!
[iPad Mini 3 Battery Replacement STEP 16]
I was able to remove the heat shield.
[iPad Mini 3 Battery Replacement STEP 17]
The battery and the connector of the liquid crystal panel are hidden in this part.
Let's remove it because the iron plate can be removed when the screw of the red circle part can be removed!
[iPad Mini 3 Battery Replacement STEP 18]
The connector is connected to the logic board, but be sure to remove it from 1.
1 is the connector part of the battery, but you can easily remove the connector from the logic board by lifting it from the bottom to the top.
[iPad Mini 3 Battery Replacement STEP 19]
The LCD panel could be removed.
[iPad Mini 3 Battery Replacement STEP 20]
I think that I was able to find the red frame part as soon as I was able to remove the panel, but this part becomes a connector of the liquid crystal glass.
You can remove the connector if you try to lift from the bottom to the top.
[iPad Mini 3 Battery Replacement STEP 21]
I was able to remove the liquid crystal glass.
[iPad Mini 3 Battery Replacement STEP 22]
This is where the battery is removed.
The red frame becomes a battery, but the battery itself is fixed with a strong tape or bond to the main body, so it is better to remove it after warming it.
[iPad Mini 3 Battery Replacement STEP 23]
It is easy to remove it when heat is applied around the red part from the back of the body.
[iPad Mini 3 Battery Replacement STEP 24]
After applying heat in the previous process, use a spatula to insert it directly into the battery.
If it seems hard, remove the spatula once, warm the rear panel again, and then repeat the process.
By doing so, you can easily remove the battery.
battery replacement and disassembly procedure sipad Mini 3 all 25 steps
To remove the battery of the iPad Mini 3, you need to remove the LCD glass and panel, so I would like to remove the battery after removing it first.
The liquid crystal glass is only stopped by a strong double-sided tape in the main body, and there is no screw at all.
It peels off the glass after applying heat, but it is necessary to be careful because it breaks when pulling forcibly and it becomes a high repair price.
If it is able to peel off overall, it will be able to lift the glass.
When the glass is peeled off from the main body, it becomes such a state, but it cannot be removed because the connector is still connected internally.
To remove liquid crystal glass (digitizer), it is necessary to remove the liquid crystal panel in the decomposition process.
The screw above is on the upper side, but this is the lower side.
It is a hidden screw.
The tape is peeled off in this way.
The tape above is on the left side, but let's peel off the tape in the same way!
コメントを残す