iPadAir2 camera failure, sandstorm, how to repair if it does not start, falls, and how to disassemble it
iPadAir2 front, rear camera and disassembly procedure
[iPadAir2 Front, Rear Camera Replacement STEP 1]
The camera does not start, falls, freezes, or displays are bad.
It is necessary to replace parts if it is initialized after taking a backup once, and it still does not improve.
In this disassembly, you can check the procedure of changing the front camera and the rear camera at the same time.
[iPadAir2 Front, Rear Camera Replacement STEP 2]
The front panel must be removed when replacing the camera. The LCD replacement of the iPadAir2 is available on other pages, so please check the decomposition process so far there.
[iPadAir2 Front, Rear Camera Replacement STEP 3]
I think that I could see the inside when I was able to remove the front panel, but the front camera and the rear camera are both on the top of the iPad.
The red frame is the front camera, and the orange part is the rear camera.
[iPadAir2 Front, Rear Camera Replacement STEP 4]
There is a long iron plate just below the camera, but since it is fixed with four screws, you can remove the plate if you can remove all the screws.
[iPadAir2 Front, Rear Camera Replacement STEP 5]
I want to remove it from the rear camera, but i can easily remove it if I lift the connector of the red frame part from the bottom to the top.
[iPadAir2 Front, Rear Camera Replacement STEP 6]
I was able to remove the rear camera.
If it is a little hard even if the connector of the previous is removed, it can be removed if it makes the surroundings a little stiff.
[iPadAir2 Front, Rear Camera Replacement STEP 7]
This is the front camera side.
You can easily remove the connector of the red frame part if it causes it from the bottom to the top.
[iPadAir2 Front, Rear Camera Replacement STEP 8]
Remove the connector and turn over the cable part.
[iPadAir2 Front, Rear Camera Replacement STEP 9]
At the moment, there is no cable connected to the camera, but since the camera itself is fixed with a sponge with double-sided tape, you can remove it if you make the camera side twist.
[iPadAir2 Front, Rear Camera Replacement STEP 10]
I was able to remove the front camera.
After that, if you replace the newly prepared parts and incorporate them according to the original procedure, the camera replacement will be completed.
iPadAir2 front, rear camera and disassembly procedure
The camera does not start, falls, freezes, or displays are bad.
The front panel must be removed when replacing the camera.
I think that I could see the inside when I was able to remove the front panel, but the front camera and the rear camera are both on the top of the iPad.
There is a long iron plate just below the camera, but since it is fixed with four screws, you can remove the plate if you can remove all the screws.
I want to remove it from the rear camera, but i can easily remove it if I lift the connector of the red frame part from the bottom to the top.
I was able to remove the rear camera.
コメントを残す