How to repair and disassemble the Macbook 12 A1534 keyboard if it doesn't work or doesn't respond
This is an effective disassembly method for keyboard replacement for the Macbook 12 A1534 EMC2746 2015 model.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 1]
If a part of the keyboard does not respond or is submerged, it is likely that a keyboard change will be required.
Please refer to it because it can be removed if you refer to the following decomposition method!
First of all, the work of removing the inside cover by turning the inside out of the main body is done first.
Because there is a screw in the place which is enclosed in a red circle, it removes all, but it is not possible to open it with a Phillips screwdriver because it becomes a screw of a special shape.
Pentabebe driver (star type), can be opened by using the Torx screwdriver, but we have used the driver of BEST 8800C 1.2.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 2]
If all screws can be removed, it will be possible to remove the back cover, but care must be taken.
When disassembling MacbookAir and MacbookPro, we will remove the back cover in the same way, but it is necessary to open it from the opposite direction from those models, but here we will only work to lift lightly using a spatula.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 3]
The side side is also lightly lifted as well, but this part has a feeling that comes off because it has a hook.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 4]
If it floats overall, I will open it, but please be sure to lift it from the same position as the image.
If you open from the opposite side, there is a possibility of disconnection because there is a cable, so be careful.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 5]
When the back cover is lifted in the previous process, it becomes the first visible part (trackpad), but we will work to remove the connector that is enclosed in a red frame.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 6]
Because the seal is attached to the connector, it is the place where it peels off using the spatula.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 7]
There is a connector under the seal above, but try to cause the nail with a spatula as shown in the image.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 8]
It is possible to remove it if the cable is pulled out in the state where the nail is raised.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 9]
I was able to remove the cable.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 10]
I was able to open the back cover somehow with this, but it has not been completed yet.
Now it knocks it backwards from the image.
If you want to explain clearly, wake up the lower side (trackpad side) in the image so that the opposite side (battery side) is put to sleep.
If it is difficult to do, please put the thing which becomes the back rest in the back so that it does not fall down.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 11]
This part is connected to the battery and the logic board, but remove the screw attached to the red circle part.
When the screw can be removed, the iron plate under it can also be removed.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 12]
I was able to remove the screw and the plate.
Please keep it so as not to lose it because there are a lot of fine parts.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 13]
The pick and the spatula (plastic) are sandwiched into the gap where the screw was removed, and the electricity is cut off.
Then, let's remove two screws of the red circle part which is in the immediate vicinity.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 14]
This part has become a connector, so you can easily remove it if you try to lift it from the bottom to the top with a spatula.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 15]
This part is called Audio Jack Board, but it becomes the earphone part.
Since a fluent cable is connected from the logic board, you can pull out the cable if you lift the black nail of the arrow part and slide it.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 16]
I was able to remove the cable.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 17]
This part becomes a cable connected to the logic board from the liquid crystal panel, but because a black seal is affixed to the connector, I peel it off first.
Since the structure of the connector has changed a little, please disassemble after understanding the structure without forcibly proceeding with the decomposition.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 18]
The black cable part is attached to the main body with light double-sided tape, so it is a place where a spatula is used and peeled off.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 19]
It is possible to remove it by lifting the pin of the connector and sliding the cable.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 20]
I was able to halve the lower half of my lower body.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 21]
The Audio Jack Board part is disassembled, but the wiring of the arrow part is removed.
You can remove it if you make the cable slide by causing the claw of the connector.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 22]
I was able to remove the wiring, but please note that this wiring is easy to cut.
Remove two red-circle screws.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 23]
I was able to remove the Audio Jack Board.
Please keep it so that it does not lose because the parts are fine here.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 24]
This is the cable part extending from the liquid crystal side, but there is a screw in the red circle part, so it will be removed.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 25]
When you can remove the screw of the previous, it becomes a feeling that the cable etc. pop pedupt out, but this part is all right as it is for the time being.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 26]
This part will be the first USB-C port installed as a Mac laptop, but first remove the screw that is enclosed in a red circle.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 27]
If you can remove the screw of the previous, the iron plate will also shift at the same time, so please keep it.
Because there is a connector under the iron plate (arrow part) you can remove it if you try to wake it up from the bottom.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 28]
I was able to remove the cable.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 29]
This is the part that connects the LCD side called the hinge to the lower body side, but the laptop is made into a "kuno-ji" and it is removed.
Because there is a screw in the red circle part, i remove both.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 30]
Because it becomes the opposite side from the previous, remove the screw in the same manner.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 31]
If it is possible to remove the previous screw on both sides, it can be separated from the liquid crystal side, but it can be removed if it slides well like the image.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 32]
Because the screw of various shapes is used for the Macbook, management is serious.
The blue sheet in the image is recommended because it becomes a magnet and it becomes very convenient to prevent the loss of the screw.
[Macbook 12 A1534 Keyboard replacement and disassembly method STEP 33]
I was able to state only the keyboard top case.
If you want to perform a top case replacement, you can port the trackpad to the next part and you are done.
This is an effective disassembly method for keyboard replacement for the Macbook 12 A1534 EMC2746 2015 model.
If a part of the keyboard does not respond or is submerged, it is likely that a keyboard change will be required.
The side side is also lightly lifted as well, but this part has a feeling that comes off because it has a hook.
If it floats overall, I will open it, but please be sure to lift it from the same position as the image.
コメントを残す