How to repair and disassemble if the FAN of the MacbookAir 11 does not turn or rotate
Fan replacement of MacbookAir A1370, please check the following decomposition method will be helpful!
[Macbook A1370 FAN replacement and disassembly method STEP 1]
It is a decomposition method that is helpful when FAN runaways, wants to clean, and wants to replace FAN.
I will do the work to remove the FAN, but I want to enter from the removal of the battery because it is necessary to remove the battery first.
[MacbookAir A1370 FAN replacement and disassembly method STEP 2]
There are 10 special screws in total when the main body is turned over.
Please prepare a Torx screwdriver because it is called a Torx screw and cannot be removed by a Phillips screwdriver.
[MacbookAir A1370 FAN replacement and disassembly method STEP 3]
If all screws can be removed, the back cover can be removed.
[MacbookAir A1370 FAN replacement and disassembly method STEP 4]
The image part is connected to the battery and the logic board, but you can remove the connector if you try to lift from the bottom to the top.
[MacbookAir A1370 FAN replacement and disassembly method STEP 5]
Since the battery body is also fixed with Torx screws, let's remove all the screws of the red circle part!
[MacbookAir A1370 FAN replacement and disassembly method STEP 6]
I was able to remove the battery!
[MacbookAir A1370 FAN replacement and disassembly method STEP 7]
Because the red mark part of the cable which connects the power board and the logic board is a connector.Use a spatula and remove it by lifting it up.
[MacbookAir A1370 FAN replacement and disassembly method STEP 8]
The SSD is secured in one Torx screw, so remove it.
[MacbookAir A1370 FAN replacement and disassembly method STEP 9]
When the screw comes off, gently lift the SSD and slide it in the direction of the arrow in the image to pull it out.
[MacbookAir A1370 FAN replacement and disassembly method STEP 10]
The FAN cable is connected to the bottom of the SSD with a small connector, so raise the pin and pull it out carefully.
[MacbookAir A1370 FAN replacement and disassembly method STEP 11]
When you have finished removing the FAN cable, remove the three torx screws on the red mark on the FAN body.
[MacbookAir A1370 FAN replacement and disassembly method STEP 12]
When all the cables and screws are removed, the FAN body can be easily removed, so if dust or dirt is attached, it will increase the cooling effect by cleaning cleanly using a soft brush.
Let's work carefully over time because it will be a precise part!
Fan replacement of MacbookAir A1370, please check the following decomposition method will be helpful!
コメントを残す