Mac repair and disassembly method yossys12345

MacbookProRetina A1502 HDMI board, Wifi exchange method 7 steps in all




How to repair macbookProRetina A1502 Wifi when it is not connected and cannot be output externally

How to replace the USB HDMI Reader Board and the Wifi terminal on the MacbookProRetina A1502 (13-inch)

[MacbookProRetina A1502 HDMI board, Wifi replacement STEP 1]
MacbookProRetina A1502 HDMI board, Wifi replacement method 1
If the card reader doesn't load or the HDMI connection doesn't work, the USB HDMI Reader Board may be faulty.
When removing the USB HDMI Reader Board, the Wifi terminal is in the same part, so I would like to disassemble it together.
Let's use out the Torx screwdriver because the screw is attached to 10 in all when the main body is turned inside out!
[MacbookProRetina A1502 HDMI board, Wifi replacement STEP 2]
MacbookProRetina A1502 HDMI board, Wifi replacement method 2
As is the case with all disassemblies, please remove the battery connector from the logic board before disassembling it!
It is important to note that you may be short-circuited just by neglecting this task.
[MacbookProRetina A1502 HDMI board, Wifi replacement STEP 3]
MacbookProRetina A1502 HDMI board, Wifi replacement method 3
It was completed to the point where the FAN was removed.
Please refer to the decomposition method so far because it is published on a separate page.
[MacbookProRetina A1502 HDMI board, Wifi replacement STEP 4]
MacbookProRetina A1502 HDMI board, Wifi replacement method 4
The Wifi terminal is connected to the USB HDMI Reader Board, so remove it first.
The Wifi terminal has three cables, but if you lift it from the bottom to the top, it will come off easily.
Next, remember to remove it because only one screw is attached.
[MacbookProRetina A1502 HDMI board, Wifi replacement STEP 5]
MacbookProRetina A1502 HDMI board, Wifi replacement method 4
If you can remove the previous screw, you can remove the Wifi terminal, and you can easily remove it if you let it slide.
[MacbookProRetina A1502 HDMI board, Wifi replacement STEP 6]
MacbookProRetina A1502 HDMI board, Wifi replacement method 4
Next, remove the USB HDMI Reader Board, but let's remove the red circle screw!
Because the screw is large and small, please use a suitable driver respectively!
[MacbookProRetina A1502 HDMI board, Wifi replacement STEP 7]
MacbookProRetina A1502 HDMI board, Wifi replacement method 4
I was able to remove the USB HDMI Reader Board.
If you want to replace parts, you can do so if you incorporate them in the original procedure.
スポンサーリンク
スポンサーリンク



コメントを残す

メールアドレスが公開されることはありません。 * が付いている欄は必須項目です

RECOMMENDこちらの記事も人気です。