MacbookPro battery replacement, inability to charge, how to repair when decreasing quickly, and how to disassemble
If the battery is not available or cannot be charged, you will need to replace the battery, so please refer to it.
[Macbook Pro Retina A1398 Battery Replacement STEP 1]
If the battery is not charging enough, or if the battery has expanded and the trackpad can not be pressed, the battery needs to be replaced.
Now, MacBookProRetina Model No.A1398 2013 battery removal and replacement will be introduced to see how to disassemble it.
[Macbook Pro Retina A1398 Battery Replacement STEP 2]
Since the process so far has been omitted, please confirm the details by the speaker exchange.
Removing the speaker stot can make it easier to remove the battery.
The work itself is possible without disassembling even the speakers, but this site emphasizes ease of work.
The reason is that it is possible to repair and replace it politely and reliably if the work is easy.
The MacBook Pro Retina battery is glued with a very strong adhesive tape.
Depending on the repair shop, it can be said that the difficulty of peeling off the battery is very high as it is said that the battery can not be reused once the battery is peeled off.
To make it easier to peel off the adhesive tape, use a heat gun (commercial dryer) to warm the top case on the back side of the battery adhesive portion from the front.
Be careful not to overheat it at this time or to let other parts melt in heat!
[Macbook Pro Retina A1398 Battery Replacement STEP 3]
After a certain amount of heat is applied, the adhesive part is peeled off using plastic spatula.
Take your time to work carefully to avoid damaging the battery or cable at this time.
If the battery is damaged by any chance, it is dangerous, so please do not reuse it by all means.
[Macbook Pro Retina A1398 Battery Replacement STEP 4]
Peel off all the adhesive tape on the back of the battery to remove the battery as shown in the image.
Take the time to work carefully to avoid damaging trackpads and keyboard cables!
In the case of replacement repair, the reverse procedure is restored.
If the battery is not available or cannot be charged, you will need to replace the battery, so please refer to it.
If the battery is not charging enough, or if the battery has expanded and the trackpad can not be pressed, the battery needs to be replaced.
Peel off all the adhesive tape on the back of the battery to remove the battery as shown in the image.
コメントを残す