IPhone6s battery does not have, charging is fast, repair method in case of expansion, decomposition method,
iPhone6s battery replacement and disassembly procedure
[iPhone6s Battery Replacement STEP 1]
Replacing the battery of the iPhone6s is the easiest content for iPhone6s as a work difficulty.
However, it is necessary to remove the liquid crystal to remove the battery, so it will start from there first.
There are cases where the screen is broken by mistake even though it is only battery replacement, so it is necessary to work carefully.
[iPhone6s Battery Replacement STEP 2]
Use a pentabeberobe screwdriver (star type) to remove two screws in the orange part, but do not forget to remove the liquid crystal unless you remove the screw.
If you have a suction cup, it will be very easy to work with, but the suction cups are sold at the home center.
It is how to remove the liquid crystal, but I set it on the home button side and try to cause it slowly in the direction of the arrow.
It may feel a little hard, but it is because it is fixed with a cooperative tape from the back side of the liquid crystal.
If it floats a little, you can completely float the LCD panel by repeating the process of peeling off the tape, so please work carefully!
The liquid crystal is completely floating.
If you just remove the connector of the battery, the liquid crystal may remain as it is, but this time it will be difficult to work in the current state because it completely removes the battery itself.
It will be after removing the connector of the battery first, please check because we have published the decomposition method in the liquid crystal replacement!
[iPhone6s Battery Replacement STEP 5]
The battery connector is hidden by an iron plate as shown in the image.
Let's remove the screw using the Phillips screwdriver!
[iPhone6s Battery Replacement STEP 6]
Iron plates can be removed by hand as long as the screws are removed.
The connector is connected to the logic board under it, but it is possible to remove it if it causes a spatula from the bottom to the top.
Please remove the liquid crystal of [STEP 4] after doing this work!
[iPhone6s Battery Replacement STEP 7]
From here, we will remove the battery itself.
There is an orange place at the bottom of the battery, but this is the important point.
I think that there are many people who seem to use it at first glance, but if you use it well, you can easily remove the battery by itself.
Because it is attached to the battery side with a seal, it will float using the pointed thing, but this tape is a tape that secures the battery alone and iPhone6s body.
[iPhone6s Battery Replacement STEP 8]
There are two tapes, but only one side is floating.
Let the other one float in the same way.
[iPhone6s Battery Replacement STEP 9]
It is sticky as in the image, and it is a tape of the structure which extends.
Please note that if you pull too much, it will cut.
If it breaks out by any chance, the only way is to float the battery from the bottom.
With this tape in it, move it toward the arrow a little bit.
[iPhone6s Battery Replacement STEP 10]
In this way, the tape is advanced little by little.
[iPhone6s Battery Replacement STEP 11]
The opposite side pulls to the upper side as before.
I think that you can understand the feeling that it seems to come off because the battery itself will guzzled up when it is possible to pull both to some extent.
Eventually, the tape comes off, but when it comes off, the battery itself is out.
[iPhone6s Battery Replacement STEP 12]
I was able to remove the battery alone from the iPhone6s body.
If you can no longer have a charge, install the newly prepared battery and return it in the reverse procedure and the work will be completed.
コメントを残す