How to repair and disassemble the PSP-3000 when the ✖️ button does not work or does not respond
PSP-3000 action button replacement (✖️, cross) and decomposition procedure
[ACTION button replacement and decomposition method STEP 1 of PSP-3000]
Start from the place where you can open the cover in the left part of the image.
What is common to all the disassemblies of the PSP-3000 is that you don't need any particularly unusual or expensive tools!
[ACTION button replacement and decomposition method STEP 2 of PSP-3000]
I think that most people have opened this cover once, but please check the meaning of the review.
Because there is a small knob in the image part, you can remove the cover by removing the hook of this part.
[ACTION button replacement and decomposition method STEP 3]
There is a battery inside, but you can easily remove it.
PSP It is common to all disassembly, but please be sure to remove the battery before disassembling.
Seal seal on the white arrow part "Please do not peel off this label.Once the product has been peeled off, we refuse to repair any of them.", but if there is no problem because one screw is hidden under this, please proceed with disassembly.
[ACTION button replacement and decomposition method STEP 4 of PSP-3000]
Remove all four screws in the white circle.
It is possible to remove it easily if there is a thin Phillips screwdriver of the tip.
[ACTION button replacement and decomposition method STEP 5 of PSP-3000]
There are screws on the side, so don't forget to remove them.
Because this fine parts become many, it is necessary to manage so as not to lose.
[ACTION button replacement and decomposition method STEP 6 of PSP-3000]
It is the opposite side of the side, but there are two here, so I will remove it.
[ACTION button replacement and decomposition method STEP 7]
You can now remove the surface cover, but you can easily remove it by using a tool as shown in the image.
There is a thing that the mark and the volume part of the PlayStation come off on the way, but please proceed without worrying because this is a problem of the structure.
[ACTION button replacement and decomposition method STEP 8 of PSP-3000]
I put a tool around the middle and gradually float it, but I think it will come off even if I don't put any special effort into it.
[ACTION button replacement and decomposition method STEP 9 of PSP-3000]
Only the side of the ✖️ button is fixed with a hook, but it is possible to remove it if it is made to break lightly.
[ACTION button replacement and decomposition method STEP 10 of PSP-3000]
The surface cover of the PSP-3000 could be removed.
[ACTION button replacement and decomposition method STEP 11 of PSP-3000]
Because the black nail is fixed to the arrow part of the image, it opens to the outside using the tool.
[ACTION button replacement and decomposition method STEP 12 of PSP-3000]
I was able to remove it.
[ACTION button replacement and decomposition method STEP 13 of PSP-3000]
It becomes the opposite side from the previous, but it can be removed if it makes it to the bottom lightly.
[ACTION button replacement and decomposition method STEP 14 of PSP-3000]
If you can remove both nails, shift them by about 1cm in the direction of the arrow.
[ACTION button replacement and decomposition method STEP 15 of PSP-3000]
It is in a state of shifting the liquid crystal panel, but you can see that there is a cable on the lower side.
Because the back side is connected by a cable, i will disassemble the back side this time.
[ACTION button replacement and decomposition method STEP 16 of PSP-3000]
It becomes the back side of the liquid crystal, but you can see that many cables are connected to the connector.
I want to remove the cable of the liquid crystal because it becomes two which is enclosed in a white frame.
[ACTION button replacement and decomposition method STEP 17 of PSP-3000]
This part should be caused from the back to the front side though it is a place where a spatula (tool) is used to cause a black nail.
[ACTION button replacement and decomposition method STEP 18 of PSP-3000]
This part is a small connector part next to the previous, but this part should cause a black nail in the opposite direction (front to back) from the previous.
You can remove it if you slide the cable while the nail is raised.
[ACTION button replacement and decomposition method STEP 19 of PSP-3000]
Only the LCD panel was able to be removed from the PSP body.
[ACTION button replacement and decomposition method STEP 20 of PSP-3000]
The action button is on the left and right, but I want to remove it from the cable of the cross button on the left side first.
There is a white part at the arrow, but you can easily remove it if you lift it from the bottom to the top, and you can remove the "L button" on the top left as it is.
[ACTION button replacement and decomposition method STEP 21]
The white frame is connected to the motherboard, so I will remove it.
It is possible to remove it easily by causing a black nail and then sliding the cable.
[ACTION button replacement and decomposition method STEP 22] of PSP-3000]
Under the cross button, it is only fixed with a light tape to the main body, so you can peel it off if you put the tool down and lift it as in the image.
[ACTION button replacement and decomposition method STEP 23]
Because the blue part next to the analog stick becomes a cable, this part will also peel off from the bottom.
[ACTION button replacement and decomposition method STEP 24 of PSP-3000]
Since the cable is extended in the companion to the parts removed by [STEP 20], we will remove the tool inserted into the lower side.
[ACTION button replacement and decomposition method STEP 25 of PSP-3000]
I was able to remove the cable of the cross button.
[ACTION button replacement and decomposition method STEP 26 of PSP-3000]
This time, I would like to remove the button ✖ on the right side.
The cable is connected to the connector of the power switch, so lift the black nail part and slide the cable.
[ACTION button replacement and decomposition method STEP 27 of PSP-3000]
I was able to remove the cable.
[ACTION button replacement and decomposition method STEP 28] of PSP-3000]
This place lies the earphone jack, but lift the black claws as before, then slide the cable out.
[ACTION button replacement and decomposition method STEP 29 of PSP-3000]
I was able to remove the cable.
[ACTION button replacement and decomposition method STEP 30 of PSP-3000]
The next is the removal of the R button in the upper right, but it is fixed with a nail at the arrow," so you can easily remove it if you lift it from the bottom to the top.
[ACTION button replacement and decomposition method STEP 31] of PSP-3000]
I was able to remove the R button.
[ACTION button replacement and decomposition method STEP 32] of PSP-3000]
Since there are no screws or connectors that are fixed in this, it is possible to remove the cable if you peel it off from the bottom to the top as shown in the image.
[ACTION button replacement and decomposition method STEP 33]
The cable extends to the inside of the R button, so try to remove the tool as shown in the image.
[ACTION button replacement and decomposition method STEP 34 of PSP-3000]
PSP-3000 action button replacement (✖️, cross) and decomposition procedure
Start from the place where you can open the cover in the left part of the image.
I think that most people have opened this cover once, but please check the meaning of the review.
コメントを残す