Power switch replacement, such as the POWERP-3000 does not turn on and the button is not turned on
PSP-3000 Power Switch Replacement and Decomposition Procedure
[PSP-3000 power switch replacement and disassembly method STEP 1]
Start from the place where you can open the cover in the left part of the image.
What is common to all the disassemblies of the PSP-3000 is that you don't need any particularly unusual or expensive tools!
[PSP-3000 power switch replacement and disassembly method STEP 2]
I think that most people have opened this cover once, but please check the meaning of the review.
Because there is a small knob in the image part, you can remove the cover by removing the hook of this part.
[PSP-3000 power switch replacement and disassembly method STEP 3]
There is a battery inside, but you can easily remove it.
PSP It is common to all disassembly, but please be sure to remove the battery before disassembling.
Seal seal on the white arrow part "Please do not peel off this label.Once the product has been peeled off, we refuse to repair any of them.", but if there is no problem because one screw is hidden under this, please proceed with disassembly.
[PSP-3000 power switch replacement and disassembly method STEP 4]
Remove all four screws in the white circle.
It is possible to remove it easily if there is a thin Phillips screwdriver of the tip.
[PSP-3000 power switch replacement and disassembly method STEP 5]
There are screws on the side, so don't forget to remove them.
Because this fine parts become many, it is necessary to manage so as not to lose.
[PSP-3000 power switch replacement and disassembly method STEP 6]
It is the opposite side of the side, but there are two here, so I will remove it.
[PSP-3000 power switch replacement and disassembly method STEP 7]
You can now remove the surface cover, but you can easily remove it by using a tool as shown in the image.
There is a thing that the mark and the volume part of the PlayStation come off on the way, but please proceed without worrying because this is a problem of the structure.
[PSP-3000 power switch replacement and disassembly method STEP 8]
I put a tool around the middle and gradually float it, but I think it will come off even if I don't put any special effort into it.
[PSP-3000 power switch replacement and disassembly method STEP 9]
Only the side of the ✖️ button is fixed with a hook, but it is possible to remove it if it is made to break lightly.
[PSP-3000 power switch replacement and disassembly method STEP 10]
The surface cover of the PSP-3000 could be removed.
[PSP-3000 power switch replacement and disassembly method STEP 11]
The power switch is connected to the action cable, so lift the nail of the arrow part and slide it.
[PSP-3000 power switch replacement and disassembly method STEP 12]
I was able to remove the cable.
Now you can remove the power switch by hand, so it is complete.
PSP-3000 Power Switch Replacement and Decomposition Procedure
Start from the place where you can open the cover in the left part of the image.
I think that most people have opened this cover once, but please check the meaning of the review.
コメントを残す