HP Pavilion dm1 LIQUID crystal repair and disassembly method 6 strokes

Screen replacement of LCD cracking in HP Pavilion dm1 Repair method, disassembly procedure

[HP Pavilion dm1 LCD repair and disassembly method STEP 1]: It is a bad display rather than there is a crack in the liquid crystal panel.
In this way, there may be bleeding in the LCD panel, but there is a suspicion of either liquid crystal panel failure, LCD cable failure, or motherboard failure.
By projecting it on an external monitor, it is possible to isolate the failure to some extent, but there is a suspicion of the liquid crystal panel in this failure.
If there are parts, I will try to replace the liquid crystal panel immediately because I can understand the result in more detail.

[HP Pavilion dm1 LCD repair and disassembly method STEP 2]: First of all, remove the battery when disassembling the laptop.

[HP Pavilion dm1 LCD repair and disassembly method STEP 3]: Since screws are not used for the liquid crystal frame, it is decomposed as it is.
It is recommended because it performs decomposition smoothly when there is a spatula like the image.
It is the position where the spatula is inserted, but it is a gap between the lcd rear panel and the liquid crystal frame.

[HP Pavilion dm1 LCD repair and disassembly method STEP 4]: Screws were not used for the LCD frame, but the LCD panel side is secured with screws.
All screws that secure the LCD panel will be removed.
If you can remove the screw, let's lay the LCD panel to the keyboard side!

[HP Pavilion dm1 LCD repair and disassembly method STEP 5]: There is an LCD cable on the back of the LCD panel, and you can easily remove the LCD cable by sliding it in parallel with the LCD panel.
With this, only the LCD panel was able to be removed from the PC.
After that, if you replace the new LCD panel, liquid crystal repair will be completed.

[HP Pavilion dm1 LCD repair and disassembly method STEP 6]: Since it came to be displayed normally when the liquid crystal panel was replaced, this failure was found to be a liquid crystal panel.
If this does not improve the display failure, there is a high possibility that either the LCD cable failure or the motherboard failure will be instead of the liquid crystal panel failure.
In that case, it is necessary to pursue the failure point because it becomes possible to isolate the failure by replacing parts.