HP 4410t LCD repair and disassembly method 7 strokes

SCREEN Replacement of HP 4410t LCD Cracking Repair Method, Decomposition Procedure

[HP 4410t LCD repair and disassembly method STEP 1]: The liquid crystal is cracked mainly on the left side, but you can check the data on the right side.
Such symptoms are the contents of the failure that occurs due to the impact of the impact or hit or dropped the PC, but if you can confirm the data like this PC, it is often solved only by the liquid crystal panel exchange.
I would like to do liquid crystal repair immediately.

[HP 4410t LCD repair and disassembly method STEP 2]: First of all, remove the battery when disassembling the laptop.

[HP 4410t LCD repair and disassembly method STEP 3]: From here, we will decompose the LCD panel, but we will do so from the removal of the liquid crystal frame.
The LCD frame is secured with several screws, and all of them have died by screw concealing.
Use sharp tools such as tweezers.

[HP 4410t LCD repair and disassembly method STEP 4]: If you peel off the screw hidden, the screw is hidden inside, so you will use the Phillips screwdriver.
There are screws in a row, so let's remove all them.

[HP 4410t LCD repair and disassembly method STEP 5]: The next process is to disassemble the LCD frame directly.
As is the same for all laptops, the LCD frame is secured with screws and plastic claws.
I removed the screw earlier, but the next step is to disassemble the plastic claws.
It is recommended because the work efficiency is improved if you use a spatula like the image and disassemble it.
Spatula can be purchased for several hundred yen at home centers, etc.

[HP 4410t LCD repair and disassembly method STEP 6]: When the liquid crystal frame can be removed, the liquid crystal panel is removed, but the LCD panel is fixed to the hinge part.
Because the screw can be removed by using the Phillips screwdriver, all the screws on the left and right are removed.
If you can remove all the left and right screws, you will be able to knock the LCD panel down to the keyboard side, so slowly turn it down.
Since the LCD cable is fixed to the back of the liquid crystal, care must be taken to prevent the cable from failing.
I think that the liquid crystal panel could have been removed if the decomposition up to this point had been done correctly.
After that, if you replace the new LIQUID panel, liquid crystal repair will be completed.

[HP 4410t LCD repair and disassembly method STEP 7]: I was able to confirm that it is displayed normally!