Fujitsu FMVA42HW LIQUID Crystal Repair and Decomposition Method 11 strokes

Screen replacement of LCD cracking of Fujitsu FMVA42HW Repair method, disassembly procedure

[Fujitsu FMVA42HW LIQUID Crystal Repair and Decomposition Method STEP 1]: Because the LCD screen is broken, it is in a state where the internal confirmation cannot be done at all.
In the case of such a liquid crystal failure, you will be worried about what the data is going to be, but you can check it by using an external monitor.
If there is still data that you usually use on an external monitor, there is a high possibility that it can be repaired only by replacing the LCD panel.
I would like to disassemble the liquid crystal of the laptop immediately.

[Fujitsu FMVA42HW LIQUID Crystal Repair and Decomposition Method STEP 2]: First, remove the battery from the laptop itself.
Be sure to do so because there is a risk of shortcircuit if you disassemble without removing the battery than the laptop.
Remove the battery by sliding the nearby knob.

[Fujitsu FMVA42HW LIQUID Crystal Repair and Decomposition Method STEP 3]: From here, the liquid crystal is disassembled.
To remove the LCD panel, it is necessary to remove the liquid crystal frame first, and the liquid crystal frame is fixed with several screws and plastic claws.
In addition, you can take out the liquid crystal panel by removing them.
There is a screw hidden in the image part, but because the screw is hidden inside, it will peel off using tweezers.

[Fujitsu FMVA42HW LIQUID Crystal Repair and Decomposition Method STEP 4]: Because the screw came into view, I used the Phillips screwdriver.

[Fujitsu FMVA42HW LIQUID Crystal Repair and Decomposition Method STEP 5]: Once all screws are removed, the next thing is to remove the LCD frame.
The liquid crystal frame is fixed with plastic claws, but it is recommended because it improves work efficiency when you use a spatula such as an image and disassemble it.

[Fujitsu FMVA42HW LIQUID Crystal Repair and Decomposition Method STEP 6]: The LCD frame is removed.
The LCD panel is now exposed, but the LCD panel itself is also fixed with screws, so I would like to remove it.

[Fujitsu FMVA42HW LIQUID Crystal Repair and Decomposition Method STEP 7]: The image part is a screw that secures the LIQUID PANEL, but because it is on the top, bottom, left and right, it will be removed all.

[Fujitsu FMVA42HW LIQUID Crystal Repair and Decomposition Method STEP 8]: The image part becomes the screw of the lower side.
The black screw on the lower left side becomes the screw of the hinge part, but it is not necessary to remove it especially in the case of the liquid crystal panel change.

[Fujitsu FMVA42HW LIQUID Crystal Repair and Decomposition Method STEP 9]: If all screws can be removed, the LCD panel can be knocked forward, but there is a WEB camera just around the middle.
The cable on the webcam and the LCD cable are the same, so slide the connector on the camera cable to remove it.

[Fujitsu FMVA42HW LIQUID Crystal Repair and Decomposition Method STEP 10]: The LCD panel is knocked down to the keyboard side.
The gold part is connected to the LCD panel, but slide it out.
The line extending from the middle to the bottom is the camera cable.
If the decomposition method so far was correct, I think that the LCD panel could be removed from the laptop body.
If you replace the newly prepared liquid crystal panel, the liquid crystal repair will be completed.

[Fujitsu FMVA42HW LIQUID Crystal Repair and Decomposition Method STEP 11]: You have verified that it is displayed correctly.s