MacbookAir battery deterioration, how to repair if it can't be charged, how to disassemble it
If the macbookAir A1369 (13 inch) battery is defective or faulty, the following decomposition method will be helpful!
[MacbookAir A1369 Battery Replacement STEP 1]
If the battery of MacbookAir has become bad, has been exhausted, if it is displayed as "battery replacement repair", you can remove the battery by referring to this decomposition method.
First of all, I turn the MacbookAir inside out and remove the back of the main body.
I think that it is possible to confirm that there are 10 small screws in all around the back cover, but All of these screws will be removed.
However, torx screwdrivers are used because they cannot be removed by ordinary drivers.
If you do not have a Torx screwdriver, please prepare it because you can purchase it for about a few hundred yen at a home center.
[MacbookAir A1369 Battery Replacement STEP 2]
If you can remove the screw of the previous, you will be able to remove it easily if you try to lift the back cover upward.
[MacbookAir A1369 Battery Replacement STEP 3]
I think that it is possible to check the battery as soon as possible if the back cover can be removed, but Remove the connector first and cut off the electricity.
You can easily pull out by sliding the connector sideways like the image part.
Now that the MacbookAir body does not flow electricity.
[MacbookAir A1369 Battery Replacement STEP 4]
Next, remove the screw that secures the battery.
Because five screws are attached to the red circle part in total, it removes everything.
[MacbookAir A1369 Battery Replacement STEP 5]
I was able to remove the battery.
If you replace the newly prepared battery and incorporate it with the original procedure, the work is complete.
Use the same thing and voltage as the battery contains the PSE mark.
Use a battery with a different voltage may damage the MacbookAir body, so be careful.
コメントを残す