how to repair lcd and glass cracks on the iMac 27 A1419
There are several types of iMacs, but some of the A1419 is very beautiful because it has a resolution of 5K.
However, unlike the previous iMac, the glass and the liquid crystal panel are integrated, so even if only glass is broken, it is necessary to replace each liquid crystal.
So it will be expensive when you compare the repair price with the previous iMac, but if you can fix the liquid crystal crack, glass cracking by yourself, so you can suppress the cost of only parts price, If you have confidence in your skills, why not try it?
[iMac27 LCD replacement, repair method 1 ]
The flat iMac LCD is not threaded, but is attached to the main unit with very powerful double-sided tape.
The way to peel off is to tear off the liquid crystal by inserting the tool into the gap between the liquid crystal and the main body as shown in the image, but if you want to replace the hard disk, this work is required, iMac 27 I feel that the decomposition of a1419 has become a higher hurdle than the previous model.
I think that there is something that can be substituted in addition to the tool of the image, but the tool of the image is very easy to use because it is a roller type.
I think that it is per playing cards as a substitute, but it is not possible to insert it into the gap if it is not a fairly thin thing.
[iMac27 LCD replacement, repair method 2 ]
Double-sided tape is attached to one lap of the liquid crystal, but the place where the tool is inserted is all right and left.
The lower side peels off without permission by the weight when opening the liquid crystal later.
[iMac27 LCD replacement, repair method 3 ]
On top, you can float the liquid crystal a little as in the image when tearing the left and right double-sided tape, but please be careful because I think that there is a cable on the back of the liquid crystal when you look inside.
[iMac27 LCD replacement, repair method 4 ]
There are two cables on the back of the LCD, but first it is removed from the cable on the right side that you looked into.
It is how to remove the cable, but it has become possible to remove it easily if it pulls it upward as it is.
[iMac27 LCD replacement, repair method 5 ]
This is the golden connector on the left side, but don't pull it out as it is.
There is a hook of "co-shaped", so let's pull out the cable itself after raising the hook with the nail.
Now that you can remove all the cable connections, let's remove the liquid crystal while slowly pulling it back to the front as it is.
[iMac27 LCD replacement, repair method 6 ]
Only the liquid crystal was able to be removed.
There is a considerable weight because the glass and the liquid crystal panel are integrated and there is 27 inches.
Once the liquid crystal to be replaced is prepared, the LCD replacement of the iMac 27 A1419 is completed if the LCD cable is ported and incorporated in the original procedure.
[Point! ]】
Use a powerful double-sided tape when installing a new LCD.
If the adhesive is put on a weak tape, it will later peel off by heat and the worst liquid crystal will fall.
If it falls, it leads to liquid crystal cracking and liquid crystal failure with a high probability, but when it comes to 5K LIQUID Crystal, it is necessary to be careful because it becomes considerably expensive only for parts price.
It is good to put the bond on top of it after pasting the tape, but the following bond is considerably recommended.
