iPhoneSE Battery Replacement Decomposition method and repair method 7 steps

Repair method s/he disassembly method of iPhoneSE battery deterioration, expansion, etc.

[iPhoneSE battery replacement and disassembly method STEP 1]: I'm using iPhoneSE and the battery is bad, the battery has expanded!
In such a case, i recommend replacing the battery.
In addition, the battery replacement has become the easiest content among iPhone repair as work difficulty.
IPhoneSE has the same parts that are used as 5s, but the battery is different, so please do not install it by mistake!

[iPhoneSE battery replacement and disassembly method STEP 2]: To remove the battery, you need to remove the LCD.
In the case of battery replacement only, it is possible to work without removing the cable in the middle process without disassembling all, but if it is difficult to do the work, there is no problem even if all the LCD front panel is removed.
Please refer to the decomposition process because it introduces it by the liquid crystal panel exchange.

[iPhoneSE battery replacement and disassembly method STEP 3]: When the battery is ready to be removed, proceed.
The battery of the iPhone is fixed with a powerful special adhesive tape, but because it peels off the adhesive tape, I use tweezers and pull the black tape of the red mark part.

[iPhoneSE battery replacement and disassembly method STEP 4]: Then, the black tape is pulled and the white adhesive tape comes out while extending.

[iPhoneSE battery replacement and disassembly method STEP 5]: Because it becomes a fairly powerful tape, it is possible with bare hands rather than tweezers, but the adhesive tape gradually peels off from between the battery and the main body while extending.

[iPhoneSE battery replacement and disassembly method STEP 6]: By carefully pulling, it stretches and peels off without cutting.

[iPhoneSE battery replacement and disassembly method STEP 7]: I was able to remove the battery easily when I finished peeling off the adhesive tape!
If you want to replace the battery with a new one, use the reverse procedure to restore it!
[Precautions when replacing the battery] Is the PSE mark listed?
The PSE mark is a safety standard based on the Electrical Appliance and Material Safety Act, and a battery that does not have the PSE mark is an illegal poor battery.
Be careful because the battery may expand, generate abnormal heat, or, in the worst case, ignite.