iPhone6sPlus camera does not start, sandstorm, repair method in case of falling, disassembly method
iPhone6sPlus Camera Replacement and Decomposition Procedures
[iPhone6sPlus camera replacement and disassembly method STEP 1]
The iPhone6sPlus has a camera front and a rear, but in this decomposition method, it is possible to confirm each decomposition procedure.
If the camera freezes or becomes a sandstorm, there is a case where the camera itself may be out of order, so it may need to be replaced.
I recommend that you try to replace it once if you want to be eligible.
[iPhone6sPlus camera replacement and disassembly method STEP 2]
When removing each camera, it is necessary to separate it between the liquid crystal side and the main body side.
I think that it is possible to confirm the decomposition method up to here by the liquid crystal exchange, so i think that it is helpful.
[iPhone6sPlus camera replacement and disassembly method STEP 3]
First of all, I want to remove the front camera attached to the liquid crystal side, but I remove all the screws in the red circle part.
Then, the plate of iron comes off immediately, so I keep it.
[iPhone6sPlus camera replacement and disassembly method STEP 4]
If you can remove the iron plate, it is possible to remove the ear speaker slower immediately below.
[iPhone6sPlus camera replacement and disassembly method STEP 5]
In the case of the front camera, it is a cable shape, but it is possible to peel off easily because it is only fixed with double-sided tape.
The front camera is now removed.
[iPhone6sPlus camera replacement and disassembly method STEP 6]
From here, I would like to remove the rear camera attached to the main body side, but I remove the screw in the red circle part and a black seal on the red square, so I remove it respectively.
[iPhone6sPlus camera replacement and disassembly method STEP 7]
If you peel off the black seal, the screw will come out under it, so don't forget to remove it.
Then it is possible to remove the cover of the red arrow part.
[iPhone6sPlus camera replacement and disassembly method STEP 8]
The rear camera is connected to the logic board, but it can be removed if it is lifted from the bottom to the top.
[iPhone6sPlus camera replacement and disassembly method STEP 9]
It is possible to remove it easily if it makes it to the other lightly.
The iPhone6sPlus has a camera front and a rear, but in this decomposition method, it is possible to confirm each decomposition procedure.
コメントを残す