How to repair and disassemble when the iPhone6sPlus battery does not have, inflated
iPhone6sPlus battery replacement and disassembly procedure
[iPhone6sPlus battery replacement and disassembly method STEP 1]
Battery replacement in disassembling the iPhone will be easier, but please be careful because it will cause a failure if you mistake the decomposition method.
[iPhone6sPlus battery replacement and disassembly method STEP 2]
Use a dedicated screwdriver to remove two red-circled screws, but be careful that this part will not be used by a Phillips screwdriver.
After removing two screws, we will try to lift the glass surface, but if you insert a spatula or a tool in the middle of the earphone and the dock connector, you can disassemble relatively smoothly.
[iPhone6sPlus battery replacement and disassembly method STEP 3]
Although the liquid crystal panel is lifted, it can be understood that it occupies most part because the battery is large.
This decomposition method is carried out until the work of removing this battery.
[iPhone6sPlus battery replacement and disassembly method STEP 4]
Since the connector of the battery is connected to the logic board, remove two screws of the red circle part.
This part uses a Phillips screwdriver.
[iPhone6sPlus battery replacement and disassembly method STEP 5]
Because there is a connector under the plate of the previous, it is possible to remove the connector if it is made to lift from the bottom to the top.
[iPhone6sPlus battery replacement and disassembly method STEP 6]
The image part will be the part where the connector on the liquid crystal side is connected, but let's remove it because it is easier to work if the liquid crystal is removed when removing the battery!
Remove all the red circle screws.
[iPhone6sPlus battery replacement and disassembly method STEP 7]
All three connectors are connected to the logic board, so remove all connectors in the arrow part.
It is how to remove the connector, but you can easily remove it if you try to lift everything from the bottom to the top.
[iPhone6sPlus battery replacement and disassembly method STEP 8]
This is the part where the connector of the liquid crystal is removed.
I think that the liquid crystal has come off by this, but please keep it because I return it later.
[iPhone6sPlus battery replacement and disassembly method STEP 9]
The battery is taped to the main unit, but it can be easily removed by making good use of the red frame sheet.
Please check how to do it because it is published in iPhoneSE battery replacement.
Battery replacement in disassembling the iPhone will be easier, but please be careful because it will cause a failure if you mistake the decomposition method.
Use a dedicated screwdriver to remove two red-circled screws, but be careful that this part will not be used by a Phillips screwdriver.
コメントを残す