Fujitsu laptop LIFEBOOK FMVA53UW AH53/U screen has broken, if the line comes to enter, liquid crystal replacement is required, but I think that you can refer to it because the repair method is open to the public.
[Fujitsu AH53/U LCD replacement 1]
Be sure to remove the battery before disassembling the memory before replacing it.
[Fujitsu AH53/U LCD Replacement 2]
Since the battery is on the back side of the main body, it has become a model that can be easily removed.
[Fujitsu AH53/U LCD Replacement 3]
There is a knob next to the battery, but slide it to the side.
[Fujitsu AH53/U LCD replacement 4]
Slide the other side to the side as well.
[Fujitsu AH53/U LCD replacement 5]
You can remove the battery by sliding the two knobs sideways.
[Fujitsu AH53/U LCD replacement 6]
To remove the LCD panel, you need to remove the hinge part here.
The hinge is screwed, so let's remove the Phillips screwdriver.
[Fujitsu AH53/U LCD replacement 7]
Let's remove the other side as well.
[Fujitsu AH53/U LCD replacement 8]
The hinge could be removed.
[Fujitsu AH53/U LCD replacement 9]
From here, we will remove the frame around the liquid crystal, but let's disassemble it by inserting the tool into the gap between the frame and the rear panel as shown in the image.
This work should be performed one lap around the liquid crystal.
[Fujitsu AH53/U LCD replacement 10]
Only the frame in front of the LCD panel could be removed.
[Fujitsu AH53/U LCD replacement 11]
The LCD panel is threaded on the back cover, so remove the screw.
In the image, the tip of the driver hits the upper left, but all four corners have screws, so it will be removed.
[Fujitsu AH53/U LCD replacement 12]
If you can remove the screw, you can turn the LCD panel toward you, but be careful not to break or scratch it because the cable is connected to the back.
[Fujitsu AH53/U LCD replacement 13]
The LCD cable can be easily removed by grasping the cable and sliding it.
I think that only the liquid crystal panel was able to be removed by this, but the liquid crystal exchange is completed if i replace it with a newly prepared liquid crystal panel and incorporate it in the original procedure.
