iPhone5c LCD glass, panel replacement and disassembly procedure
[iPhone5c LCD glass, panel replacement STEP 1]
This decomposition method is an effective repair procedure and decomposition method in the case of lcd cracking of iphone5c, line on the screen, and poor display of liquid crystal.
In many cases where the screen is broken, the liquid crystal often cracks due to the fall of the iphone.
Even if you wear an iphone cover, liquid crystal cracking is one of the troubles that does not prevent easily.
In addition, because the screen cracking is the most common trouble in the failure of the iphone, it is important to suppress the repair fee even a little.
Then, I want to take it apart.
Turn off the iPhone and remove the two red-circled screws.
All the screws used for the iPhone are quite small, so keep them so that they don't lose them.
[iPhone5c LCD glass, panel replacement STEP 2]
When the screw is removed, remove the liquid crystal using a sucker as shown in the image.
The liquid crystal does not crack because it becomes a repair method to the last this time.
If the liquid crystal is cracked, air enters, and even if you use a sucker, it will bite badly, so please substitute it with a thing other than a sucker.
If there is a thin tweezer, it is possible to remove it without using a sucker.
Decomposition of the iphone is the basic work to remove the liquid crystal glass in any model.
If you find it difficult to disassemble this process, don't hesitate to ask a repair eras.
It may break down more than now.
As shown in the image, from the home button side, it will raise the screen facing up.
[iPhone5c LCD glass, panel replacement STEP 3]
It becomes a state like the image when I try to wake it up from the home button side.
When disassembling, it is an image to suppress the liquid crystal with one hand and remove the screw by grasping the screwdriver with the other hand.
[iPhone5c LCD glass, panel replacement STEP 4]
In the iron plate of the red circle part, the liquid crystal cable of the iPhone, the camera cable, etc. are hidden, so remove all the screws of the red circle part.
Some cables are connected, but remove the battery first.
[iPhone5c LCD glass, panel replacement STEP 5]
The battery connector is connected to the iron plate of the red circle part in the image.
Remove the screw and remove the battery connector.
When the battery is removed, disconnect the LCD and camera cables under the plate removed by STEP4 from the iPhone.
[iPhone5c LCD glass, panel replacement STEP 6]
1 is the connection part of the battery.
2 will be a liquid crystal cable, a camera cable, so please remove it in order.
Since the connector is connected from the top to the logic board, it can be removed if it is raised from the lower side.
[iPhone5c LCD glass, panel replacement STEP 7]
The lcd replacement of the iPhone5c is completed if the upper side is the front camera part and the lower side becomes the home button, but if you remove each and port it to the next liquid crystal panel, the LCD replacement of the iPhone5c is completed.
This decomposition method is an effective repair procedure and decomposition method in the case of lcd cracking of iphone5c, line on the screen, and poor display of liquid crystal.
When the screw is removed, remove the liquid crystal using a sucker as shown in the image.
It becomes a state like the image when I try to wake it up from the home button side.
In the iron plate of the red circle part, the liquid crystal cable of the iPhone, the camera cable, etc. are hidden, so remove all the screws of the red circle part.
コメントを残す