Decomposition of Shrarp air purifier FU-Z51CX was performed.
Since it becomes a 2011 release model, it has become a little old type now, but I want to disassemble and clean up to a fine place.
It is easy to replace the dust collection filter and deodorization filter, but the purpose of this time is not a filter, but the original purpose is to remove the dirt that would be lurking in the back.
The tool used for disassembly is basically only for the driver, but when cleaning up to the wings, you will also need a monkey.
[Sharp Air Purifier FU-Z51CX Decomposition Method 1]
The air purifier which disassembled this time becomes this.
I have replaced the filter once more than five years ago, but I have never cleaned anything else.
[Sharp Air Purifier FU-Z51CX Decomposition Method 2]
When it comes to the current model, there are many models such as plasma cluster 25000 and 50000, but is the amount of plasma cluster considerably compared to that?Number?I feel quite little.
[Sharp Air Purifier FU-Z51CX Decomposition Method 3]
It is quite easy when replacing the filter because there is a precipitate filter and a deodorizing filter in this though the back cover comes off when the knob of the back side of the main body is pulled out to the front.
[Sharp Air Purifier FU-Z51CX Decomposition Method 4]
The left is the precipitated filter, and the right side is the deodorizing filter.
I feel that the deodorizing filter was black from the original, but you can see that the precipitating filter is dirty enough not to know the original color.
Deodorant filter seems to be able to hold for 10 years depending on how to use only washing with water, but the dust filter seems to need to be replaced with beans depending on the use environment because it can not be washed with water.
I think that the last time I replaced it was more than five years ago, but it is quite scary considering whether I was using an air purifier in this state.
[Sharp Air Purifier FU-Z51CX Decomposition Method 5]
I just removed two filters, but I found that there is a lot of dust and dirt attached to the plastic part around the filter.
[Sharp Air Purifier FU-Z51CX Decomposition Method 6]
I do not know wcause it is mold in the recessed part, but you can see that it is dirty in large quantities, including dust.
These parts can not be cleaned only by the filter exchange, but let's break down because there is a high possibility that there is dust further to the back.
[Sharp Air Purifier FU-Z51CX Decomposition Method 7]
When the filter is removed, it is in such a state, but there is a screw in the red circle part.
I use a Phillips screwdriver to remove the screw, but i need a long screwdriver because the depth of the hole is decent.
There is also a screw in the recess of the red arrow part, so don't forget to remove it.
[Sharp Air Purifier FU-Z51CX Decomposition Method 8]
If all screws can be removed, it can be disassembled only by hand as in the image.
[Sharp Air Purifier FU-Z51CX Decomposition Method 9]
I just removed the cover, but I was able to confirm the garbage that seems to have gotit inside.
[Sharp Air Purifier FU-Z51CX Decomposition Method 10]
This part is the front power button, inside the lamp relationship.
[Sharp Air Purifier FU-Z51CX Decomposition Method 11]
Let's keep an attention to the wiring.
[Sharp Air Purifier FU-Z51CX Decomposition Method 12]
It becomes the lower part where there was a part of the previous, but it can be underused that it is also dirty here.
It is a place that can not be cleaned without disassembling up to this point.
[Sharp Air Purifier FU-Z51CX Decomposition Method 13]
There is a big FAN, but we will also break it down.
Because there is a small screw in the middle, i use a monkey and a spanner to remove the screw.
[Sharp Air Purifier FU-Z51CX Decomposition Method 14]
After removing the screw, it is possible to remove the fan if you lift it upward.
[Sharp Air Purifier FU-Z51CX Decomposition Method 15]
At first glance, you may not know if it is dirty, but please compare it with the following image.
[Sharp Air Purifier FU-Z51CX Decomposition Method 16]
I rubbed the feather part with a toothbrush and saw it, but something like sand was attached.
[Sharp Air Purifier FU-Z51CX Decomposition Method 17]
I laid white paper for clarity.
I just rubbed about a few blades with a toothbrush, but the dirt stands out.
Summary
Because the FU-Z51CX has two layers of filters, I thought that dust stopped with a filter, but when I tried to disassemble it, I found that the inside was quite dirty.
If you do not disassemble up to this point and clean it, it is the same as the filter exchange alone, so I think that the decomposition difficulty is not a model that is high, so I recommend disassembly if the filter is replaced.
In addition, I washed the deodorizing filter with water, but the water became quite black.
