EPSON NY2200S Liquid Crystal Repair and Decomposition Method 9 Strokes




EPSON NY2200S LCD Cracking Screen Replacement Repair Method, Decomposition Procedure

If the EPSON NY2200S screen has cracks, display defects, or cracked liquid crystal, a panel replacement is required.

[EPSON NY2200S LIQUID LIQUID REPAIR and Decomposition Method STEP 1]
EPSON NY2200S Decomposition Method 1
If the LCD is broken, display edress or cracks in the EPSON laptop, repair is necessary.
You can also ask a manufacturer or consumer electronics retailer, but if you can repair it yourself, you can cure it at about half price compared to the case of asking the manufacturer, so please refer to it if you want to repair it cheaply even a little.
Please prepare each one because it is necessary to have a Phillips screwdriver, a spatula, etc. when performing disassembly.
[EPSON NY2200S LIQUID LIQUID REPAIR and Decomposition Method STEP 2]
EPSON NY2200S Decomposition Method 2Be sure to remove the battery first when disassembling.
Battery can be easily found battery if you turn the body inside out , but you can remove it by sliding the knob next to it.
[EPSON NY2200S LIQUID LIQUID REPAIR and Decomposition Method STEP 3]
EPSON NY2200S Decomposition Method 3From here, we will decompose the liquid crystal side, but some screws and rubber stop in the liquid crystal frame as shown in the image part.
First of all, the rubber is peeled off with a pointed thing such as tweezers.
Then, it will be removed from the Phillips screwdriver because it can be confirmed that there is a screw in the inside.
[EPSON NY2200S LIQUID LIQUID REPAIR and Decomposition Method STEP 4]
EPSON NY2200S Decomposition Method 4Since the frame itself is fixed with six screws in total, let's remove all the screws of the red frame part!
The screws will be reused later, so please keep them so that they do not disappear.
[EPSON NY2200S LIQUID LIQUID REPAIR and Decomposition Method STEP 5]
EPSON NY2200S Decomposition Method 5When removing the frame, a plastic spatula is used.
Up to now, we have performed a number of disassembly of laptops, but plastic spatulas are the most convenient to use.
In addition, it can be recommended because it is hard to scratch the body.
Because I think that there is a feeling that it is coming off when I insert a spatula into the gap, I can remove the frame by doing this work on one lap of the liquid crystal.
[EPSON NY2200S LIQUID LIQUID REPAIR and Decomposition Method STEP 6]
EPSON NY2200S Decomposition Method 6When the frame can be removed, the panel will be visible, but the LCD panel itself is fixed to the rear panel side with several screws, so remove the screw son of the red frame part.
[EPSON NY2200S LIQUID LIQUID REPAIR and Decomposition Method STEP 7]
EPSON NY2200S Decomposition Method 7I think that it is possible to confirm that the LIQUID cable is connected when the panel can be knocked down to the keyboard side, but you can easily remove it if you slide it like an image.
[EPSON NY2200S LIQUID LIQUID REPAIR and Decomposition Method STEP 8]
EPSON NY2200S Decomposition Method 8I think that I was able to remove only the panel from the PC body, but the model number of the liquid crystal panel used in EPSON NY2200S has become B140XW03 V.0!
[EPSON NY2200S LIQUID LIQUID REPAIR and Decomposition Method STEP 9]
EPSON NY2200S Decomposition Method 9It is in a state where the laptop is turned on after all the state back, but you can confirm that it is displayed normally.
All the work of the liquid crystal change is completed by this.
スポンサーリンク
スポンサーリンク



Leave a Reply

Your email address will not be published. Required fields are marked *