Fujitsu FMVS54GDAW LCD screen cracking, IF THERE is a display failure in the liquid crystal, liquid crystal panel replacement (liquid crystal replacement) is required!
[Fujitsu FMVS54GDAW LIQUID Crystal Repair and Decomposition Method STEP 1]
Most of them are visible, but there are cracks in some places.
Let's change the LCD panel and display it normally.
[Fujitsu FMVS54GDAW LIQUID Crystal Repair and Decomposition Method STEP 2]
Be sure to remove the battery when disassembling the laptop.
If you disassemble without removing the battery, there is a risk of shortcircuit and it may lead to other failures.
[Fujitsu FMVS54GDAW LIQUID Crystal Repair and Decomposition Method STEP 3]
The LCD frame of Fujitsu LIFEBOOK SH54/G does not have a single screw.
Because it is only fixed with a plastic nail, it decomposes using a plastic spatula like the image.
If you break the nail, only the part there will float, so break down carefully so as not to break the nail.
The liquid crystal frame can be removed by performing a one-lap decomposition around the liquid crystal.
[Fujitsu FMVS54GDAW LIQUID Crystal Repair and Decomposition Method STEP 4]
When the LCD frame can be removed, the entire LCD panel can be seen.
Since the LCD panel is not particularly screwed, please slowly turn it down to the keyboard side as it is.
[Fujitsu FMVS54GDAW LIQUID Crystal Repair and Decomposition Method STEP 5]
The LCD cable is connected to the back of the LCD panel.
When sliding like an image, it is possible to remove it from the LCD panel.
I think that the liquid crystal panel was removed from the personal computer body if the decomposition method up to this point was able to be done.
After that, if you replace the newly prepared liquid crystal panel, the lcd panel replacement will be completed.
[Fujitsu FMVS54GDAW LIQUID Crystal Repair and Decomposition Method STEP 6]
You have verified that the screen is displayed correctly.
