Fujitsu LIFEBOOK AH56/G FMVA56GL LCD if there is a screen crack or display failure, LCD panel replacement is required!
[Fujitsu FMVA56GL LIQUID Crystal Repair and Decomposition Method STEP 1]
You can see that there is a line or display failure by the liquid crystal cracking.
The cause of this state is that the laptop has been dropped, or occupied the lid with a mouse or USB on the keyboard.
If you do liquid crystal repair at the manufacturer will be very expensive, but please try to challenge because you can cure cheaply if you can do exactly this decomposition method!
[Fujitsu FMVA56GL LIQUID Crystal Repair and Decomposition Method STEP 2]
First of all, the battery is removed from the laptop body, but you can easily remove it by sliding the knob next to the battery.
If you proceed with the decomposition without performing this work, there is a possibility that it will shortdown internally, so be sure to do so.
[Fujitsu FMVA56GL LIQUID Crystal Repair and Decomposition Method STEP 3]
From here, we will enter the decomposition of the liquid crystal side.
Since the LCD panel is stuck between the rear panel and the LCD frame, we will remove the frame.
If you remove the rubber as shown in the image part, the screw will come into view, so try to remove the Phillips screwdriver.
[Fujitsu FMVA56GL LIQUID Crystal Repair and Decomposition Method STEP 4]
It is a place where the Phillips screwdriver is removed, but the screw is attached to the four corners of the liquid crystal, so please remove all.
[Fujitsu FMVA56GL LIQUID Crystal Repair and Decomposition Method STEP 5]
If all screws can be removed, the liquid crystal frame can be disassembled, but it is inserted between the rear panel and the frame using a spatula like the image.
It is possible to remove the frame if you make it loose lightly after inserting it, but since the frame itself has become a structure that is fixed with a plastic claw, please disassemble while carefulnot to fold.
I think that i was able to remove only the frame if I disassembled while inserting a spatula around the liquid crystal for one week.
[Fujitsu FMVA56GL LIQUID Crystal Repair and Decomposition Method STEP 6]
I think that the liquid crystal panel became bare when the frame was able to be removed.
The panel itself is also fixed with screws to iron called hinges, so we will work to remove it.
First of all, I think that there is an image part on the lower side of the liquid crystal, but Remove this screw.
It is OK even if the screw is loosened by half though it is OK even if it removes it completely.
In this decomposition method, only half of the screws have been loosened.
[Fujitsu FMVA56GL LIQUID Crystal Repair and Decomposition Method STEP 7]
If you can loosen the screw of the previous, you can make the liquid crystal diagonally slightly.
Let's remove all the screws on the side that secure the panel in a diagonal state!
The screw is fixed to the left and right hinges, but if you can remove it, you can move the panel itself, so please lower it to the keyboard d-side.
At this time, the cable is still connected to the back of the LCD panel, so please knock it down while paying attention!
[Fujitsu FMVA56GL LIQUID Crystal Repair and Decomposition Method STEP 8]
I think that I was able to confirm the part where the cable is connected to the panel though the panel is knocked down.
You can easily remove it if you slide it like an image.
I think that only the liquid crystal panel was able to be removed from the laptop body by this.
After that, if you replace the newly prepared parts and incorporate them in the original procedure, the liquid crystal repair of Fujitsu FMVA56GL AH56/G is complete.
[Fujitsu FMVA56GL LIQUID Crystal Repair and Decomposition Method STEP 9]
It is in a state of turning on the power after assembling, but I was able to confirm that it is displayed normally.
Since the data itself remains as it is, you can use the laptop in the environment until now.
