Fujitsu FMVA42CW LCD screen cracking, if there is a display failure in the liquid crystal, liquid crystal panel replacement (LCD replacement) is required!
[Fujitsu FMVA42CW LIQUID Crystal Repair and Decomposition Method STEP 1]
Because the screen is broken, the line has entered the whole.
By using an external display, the internal data can be confirmed, so I think that it is possible to use the laptop normally in the liquid crystal panel exchange.
I would like to repair the LCD of the laptop immediately.
[Fujitsu FMVA42CW LIQUID Crystal Repair and Decomposition Method STEP 2]
Remove the battery from the laptop.
There is a risk of short-circuiting if you do not remove the battery and perform the decomposition as it is, so be sure to do so when disassembling not only the liquid crystal panel.
The battery can be easily removed by sliding the knob to wake it up.
[Fujitsu FMVA42CW LIQUID Crystal Repair and Decomposition Method STEP 3]
From here, the liquid crystal is disassembled.
I think that it can be confirmed that there is a screw hidden in the liquid crystal frame and there is a screw inside.
Let's peel off all screw shids first of all using tweezers and the like!
[Fujitsu FMVA42CW LIQUID Crystal Repair and Decomposition Method STEP 4]
The screws inside can be easily removed using a Phillips screwdriver.
[Fujitsu FMVA42CW LIQUID Crystal Repair and Decomposition Method STEP 5]
Next, remove the LCD frame.
If all the screws can be removed in the previous process, the next step is to disassemble the liquid crystal frame.
The LCD frame is fixed with plastic claws in addition to screws, but can be removed by using a spatula (tool) such as an image.
The entire LCD frame can be removed by inserting a spatula around the liquid crystal.
[Fujitsu FMVA42CW LCD repair and disassembly method decomposition STEP 6]
The LCD frame can be removed and the leva LCD panel can be seen, but the LCD panel itself is also fixed to the hinge part (iron frame) with screws.
Because it can be removed by using a Phillips screwdriver as well here, the left and right screws should be removed.
If all screws can be removed, the LCD panel will be able to be knocked down to the keyboard side, so be careful to remove the cable on the back.
[Fujitsu FMVA42CW LIQUID Crystal Repair and Decomposition Method STEP 7]
You can see that there is an LCD cable on the back of the LCD panel, but you can easily remove the LCD cable by sliding it parallel.
I think that only the liquid crystal panel was able to be removed from the personal computer if the decomposition process up to this point was able to be done accurately.
After that, if you replace it with a newly prepared liquid crystal panel, liquid crystal repair will be completed.
[Fujitsu FMVA42CW LIQUID Crystal Repair and Decomposition Method STEP 8]
The login screen of windows7 was confirmed by replacing the new LCD.
