If the glass of the iPhone is broken, I think that it is replacing each liquid crystal, but do you know that it is possible to play the liquid crystal?
I think that there are a lot of people who do not know the individual, but I think that there is probably heard once if it is an iPhone repair shop.
Please note that the screen condition in which this playback method can be used is only when there is a crack or crack in the glass on the surface, and if there is a display defect or touch defect on the panel side, it cannot be played.
Those who will be out of the iPhone repair shop from now on, but it can be said to all those who are open at the moment, it is possible to significantly cost cut if you play in-house.
This liquid crystal playback method is a page for repair companies, and it takes an initial investment because it is not possible to reproduce without a special machine.
Even if there is some initial investment, if you do the number, it will be able to recover at an early stage, so if you are interested, please refer to it.
Individuals want to play a few glasses!In the case of honest, it is better to buy an assembly that is sold because it will be in the red.
If I explain lightly what machine to use, the screen of the iPhone has a two-layer structure when roughly divided.
The glass on the surface and the inner panel are separated, but in simple terms, two sheets (glass and liquid crystal) are attached with adhesive material.
Glass and liquid crystal are peeled off by adding heat, but it is a machine used for that purpose.
Is this machine cheap and tens of thousands of yen?
It is a place where the glass of the surface and the inner panel are separated by a special tool, but the glass which has broken in such a shape is peeled off.
Depending on the glass recycler, the machine used and how to peel it are different, but in general it is like this.
When the glass is peeled off, the glue remains, so each polarizing film is replaced with a new one.
This work is where the old polarizing film is peeled off, but this black sheet is a mechanism to display the screen.
So, it's not just a black sheet, it's a part of the iPhone that has a very important role.
Even if the polarizing film is peeled off, it is made clean because it has a glue on the bottom.
In addition, even if you incorporate it into the iPhone in this state, the screen is only displayed in pure white, but the liquid crystal will be reproduced by doing the next step.
It is a glass of the newly prepared surface.
Because it remains as it is when it is finished when the fingerprint is attached or dust enters, it is necessary to be careful in handling it.
Because it peels off as it is now, it is made to adhere completely with a special press machine.
[iPhone6 LCD glass, panel replacement STEP 12]
Even if it is made to adhere, there are still a few bubbles inside, so we will regenerate the liquid crystal set in the vacuum machine.
This machine is several hundred thousand yen.
[iPhone6 LCD glass, panel replacement STEP 13]
IPhone Glass Playback Is Complete!
[iPhone6 LCD glass, panel replacement STEP 14]
The power is turned on and displayed.
I think that it can be confirmed that it is beautiful compared to before reproduction.
Because the original panel is recycled to the last, the brightness may be a little dark, but it is also possible to replace only the backlight.
