分解方法の事なら分解.biz

iPhone6s dock connector, earphone replacement and disassembly method All 6 steps

How to repair or disassemble iPhone6s if you can't charge your iPhone6s or if iTunes doesn't recognize it

iPhone6s dock connector, earphone replacement and disassembly procedure

[iPhone6s Dock Connector Earphone Replacement STEP 1]
iphone6s dock connector earphone replacement decomposition method 1If you can't charge your iPhone6s or lose sound from your earphones, the parts themselves may have failed.
If you can not charge, battery failure may be the cause, but if it does not improve even if you replace the parts, the dock connector may be faulty.
Once you have a backup and initialize it, but if the symptoms still do not improve, there is a possibility that it is physically faulty, so please try to replace the parts as follows!
In the case of iPhone6s, the dock connector and earphones are made up of one part, so it will be replaced together even with one of the failures.
[iPhone6s Dock Connector Earphone Replacement STEP 2]
The decomposition process on the way is omitted.
The decomposition method is the same until the process of removing the loudspeaker, so please check by replacing the loudspeaker.
[iPhone6s Dock Connector Earphone Replacement STEP 3]
I'd like to break down from here to remove the dock kernector earphones.
There are a lot of screws, but please remove all screws of the red part and the orange part first.
Because the length and the size are slightly different, please keep it so that it does not understand.
[iPhone6s Dock Connector Earphone Replacement STEP 4]
If all the screws of the previous one can be removed, the rest will be basically fixed with a light double-sided tape.
Because it is in a state that is glued to the iPhone6s body, I will float little by little using a spatula.
[iPhone6s Dock Connector Earphone Replacement STEP 5]
If it can be peeled off to some extent, it is possible to peel off easily by using a finger or spatula.
[iPhone6s Dock Connector Earphone Replacement STEP 6]
The dock connector and earphone part could be removed.
It becomes a little hard work as a process of decomposition, but I think that this decomposition method will be helpful.
モバイルバージョンを終了