分解方法の事なら分解.biz

iPhone6plus Camera Replacement Repair method and disassembly method All 9 steps

How to repair or disassemble if the iPhone6sPlus camera does not start or fails

iPhone6plus camera replacement and disassembly procedure

[iPhone6plus Camera Replacement STEP 1]
iphone6 plus decomposition method 1This disassembly method allows you to check how to remove the front camera and rear camera of the iPhone6Plus.
Since the process up to this point can be confirmed by liquid crystal replacement, please refer to the person who is replacing parts.
[iPhone6plus Camera Replacement STEP 2]
First of all, I want to disassemble the front camera side, but i use the Phillips screwdriver because there are three screws in all in the red circle part.
[iPhone6plus Camera Replacement STEP 3]
If the screw can be removed, it is possible to remove each plate.
The camera part is divided into three parts in all, and it becomes the plate, the ear speaker, and the front camera of the previous.
[iPhone6plus Camera Replacement STEP 4]
I think that it is easy to remove the ear speaker by hand easily when the camera cable is lifted.
[iPhone6plus Camera Replacement STEP 5]
Since the camera cable is fixed with double-sided tape, it peels off from the bottom to the top using the tool as shown in the image.
[iPhone6plus Camera Replacement STEP 6]
The front camera could be removed.
In the case of part replacement, it is completed if it is incorporated by the reverse procedure.
[iPhone6plus Camera Replacement STEP 7]
I'd like to remove the rear camera from here.
First of all, remove all the screws of the red circle part.
[iPhone6plus Camera Replacement STEP 8]
I was able to remove the plate on the rear camera.
Because the connector is connected to the logic board, it will be removed.
[iPhone6plus Camera Replacement STEP 9]
I was able to remove the rear camera.
モバイルバージョンを終了