分解方法の事なら分解.biz

lcd replacement, glass replacement and disassembly repair method of iPhone6 all 23 steps

repair and disassembly method of iPhone6 glass cracking, wire on screen, liquid crystal cracking

This decomposition method is an effective repair procedure and decomposition method when the lcd crack ing crystal of the iphone6, the line is in the screen, and the display defect appears on the liquid crystal.
It is the iPhone6 which has become a model a little while ago now, but there is also that the iPhone has been an explosive hit, I think that there are people who are used as a sub-machine of WIFI use.
The repair price in the case of fixing at iPhone repair shops in various parts of the country seems to be the most common from 5000 yen to around 7000 yen, but if you can repair it yourself, you can fix it cheaply.
I think that it is possible to refer to it because I have prepared a decomposition method for the person who wants to exchange the liquid crystal of the iPhone6 by myself.

Will the data disappear if I change the LCD?

The data will not disappear just by changing the liquid crystal.
Since the data of the iPhone is recorded in the part called NAND on the logic board, the data is not lost just by replacing the liquid crystal.
However, the data is not lost only if you repair it yourself or repair it at a non-regular store.
If you want to change the liquid crystal with the data left, you want to avoid manufacturer repair because it is almost 100% data initialization when you ask Apple or an authorized service provider.
In addition, if you can take a backup in iTunes, etc., there is no problem with the manufacturer repair, but you can not take the backup, if you feel troublesome please consult a non-regular store.
The advantage of non-regular stores is that most of the repairs that are not related to the data will proceed with the data as it is.
If you can replace the liquid crystal by yourself with reference to the decomposition method below, you can use the iPhone as it is with the data up to now.
However, it is safe to back up and remember how to back up in case of a failure that you do not know when it will happen.
When I changed the LCD of the iPhone6 with Apple, it was 14800 yen.

iPhone6 LCD glass, LCD panel replacement and decomposition procedure

[iPhone6 glass replacement, liquid crystal replacement STEP 1]
iphone6 Decomposition Method 1
Then, I want to take it apart.
All the screws used for the iPhone are quite small, so keep them so that they don't lose them.
The orange tool in the image is called a suction cup and can be purchased at home centers, etc.
If there is a crack in the liquid crystal, a crack in the screen, a suction cup can not be used, it is posted as a procedure of decomposition.
First, turn off the power of the iPhone and remove the two red-circled screws.
[iPhone6 glass replacement, liquid crystal replacement STEP 2]
Place the suction cup over the home button and lift it upward.
If the suction cup can be set well, the inside will be in a vacuum state, so you can remove it by pulling the liquid crystal part while suppressing the main body.
If the suction cup cannot be set well, and if you do not have a bag, insert a thin tool at the tip into the gap between the liquid crystal and the main body per earphone.
[iPhone6 glass replacement, liquid crystal replacement STEP 3]
It is a state in which the liquid crystal of the home button side is lifted a little.
In the image, we use a suction cup, but if there is no or in the case of a state that can not be used, if you insert a thin object into the gap of the liquid crystal per earphone, you can make a little gap, so after opening, proceed with decomposition by the same procedure.
[iPhone6 glass replacement, liquid crystal replacement STEP 4]
If you wake up the liquid crystal as it is, it will look like the above.
From here, the screw is finely attached, so it is a good idea to check the position of the screw roughly.
If you forcibly lift the liquid crystal, do not cause the liquid crystal to be more than 90 degrees because the cable is still connected to the logic board side.
[iPhone6 glass replacement, liquid crystal replacement STEP 5]
It is a procedure to remove the liquid crystal after removing the connector of the battery.
Therefore, although the liquid crystal has not come off yet, it is an image that suppresses the liquid crystal with one hand and removes the connector of the battery with the other hand.
The battery connector is hidden in the position of the image, but there is an iron plate in the connection part of the connector.
Let's remove both screws using a thin Phillips screwdriver at the tip.
[iPhone6 glass replacement, liquid crystal replacement STEP 6]
The iron plate is removed.
In order to make it easy to understand in the image, we remove it with tweezers, but it is safer to remove it with a plastic spatula or by hand.
The iPhone is energized because the battery connector is still connected in this state.
If the tip of the tweezer touches the metal part of the base side by any chance, there is a possibility that it will be shorted, so be careful.
[iPhone6 glass replacement, liquid crystal replacement STEP 7]
When the iron plate is removed, there is a place where the connector is connected to the inside, but the battery becomes a red frame part, so be pulled out from the bottom to the top.
In terms of the image, it is an image to lift from the right side to the left side toward m.
In addition, when lifting the connector, please use the material of the plastic rather than the metal such as tweezers.
If you try to remove it with tweezers, etc., you may be short-circuited, so be careful.
[iPhone6 glass replacement, liquid crystal replacement STEP 8]
Note that the connector part may break if it is attached or removed many times because of a thin cable though the connector of the battery is removed.
There is no need to remove the battery body just by removing the connector as long as you only perform the LCD replacement of the iPhone6.
[iPhone6 glass replacement, liquid crystal replacement STEP 9]
Next, the decomposition is the upper side of the main body, but all connectors of the liquid crystal are contained in this iron plate.
Because the iron plate is attached like the previous battery, I remove five screws in the same way, but all screws are positive, so please remove it with a Phillips screwdriver.
In addition, since the length of the screw is different one by one, I manage so as not to forget the location of the screw.
[iPhone6 glass replacement, liquid crystal replacement STEP 10]
When the screw can be removed, there is a connector in the same way as the previous process (battery), so remove 4 places.
If you remove the connector, you can remove it if you try to lift all the connectors from the bottom to the top.
If even the battery connector is off, there is no problem with familiar tools such as tweezers.
This cable includes not only LCD cables, but also camera cables.
[iPhone6 glass replacement, liquid crystal replacement STEP 11]
All connectors can be easily removed by lifting them from the bottom to the top, but please do not disconnect the cable part so that it is easy to cut.
It is necessary to work carefully because it becomes a high repair price if not only the disconnection but also the logic board side is damaged.
[iPhone6 glass replacement, liquid crystal replacement STEP 12]
I have removed four connectors, but if you forcibly remove the connector, the base side may be damaged.
If the base breaks down, even if the liquid crystal is replaced, the screen will only appear faintly and the line will enter.
In that case, try to remove it carefully because you will need to repair the logic board!
[iPhone6 glass replacement, liquid crystal replacement STEP 13]
I was able to divide it into the iPhone body side and the liquid crystal side by the decomposition up to this point.
In the case of liquid crystal replacement, it is necessary to decompose further from here, and the camera and the home button need to be implanted into the newly prepared liquid crystal.
Since the camera has a proximity sensor and a fingerprint authentication on the home button, both are important parts.
For the time being, the main body side is okay to avoid it in order not to use it.
[iPhone6 glass replacement, liquid crystal replacement STEP 14]
First of all, it enters the decomposition of the front camera side, but remove the screw of the part which is enclosed in a red circle.
Inside, there are front camera and ear speaker parts, which are ported to the next LCD.
Of course, if you fail, the camera may not recognize it, so be careful about disconnections and breakdowns.
[iPhone6 glass replacement, liquid crystal replacement STEP 15]
The front camera and the ear speaker came into view though the iron plate was removed.
It is a way to remove, but you can remove the ear speaker son of the inside by hand if you first lift the camera part on the right side toward.
The front camera is a long cable, but in addition to the camera, there is a thing called proximity sensor.
The function of the proximity sensor of the iPhone, the screen is attached when the iPhone is released from the face (ear), but I think that the screen will disappear when you put the face on the iPhone is that function.
If the proximity sensor breaks down, be careful not to disconnect it when removing the camera cable because it is quite anxious.
[iPhone6 glass replacement, liquid crystal replacement STEP 16]
You can remove it as a part if you can remove the iron plate of the previous.
The camera cable is fixed to the main unit with double-sided tape, but it is possible to remove it if it is slowly lifted from the bottom to the top.
If the cable does not peel off easily, it will be easier to peel off because the tape will swell if the heat of the dryer is lightly applied.
[iPhone6 glass replacement, liquid crystal replacement STEP 17]
Next, it enters the decomposition of the home button side, but remove the screw of the red circle part.
Then, let's remove it because it is possible to remove the plate of iron!
[iPhone6 glass replacement, liquid crystal replacement STEP 18]
The iron plate is removed.
The iPhone6 has a fingerprint authentication function, but if you fail the home button, you will not be able to use fingerprint authentication.
Even if you cut off the cable of the home button by any chance, replacement parts are sold.
However, please note that the replacement home button does not listen to fingerprint authentication.
Lcd replacement must also be done carefully, but in terms of importance, it is here.
[iPhone6 glass replacement, liquid crystal replacement STEP 19]
The home button does not stop the screw etc. in particular, but it stops with a light double-sided tape, so you can easily remove it by pressing it from the front side.
It is easy to peel off if the wiring does not peel off easily as well as the camera cable here by applying the heat of the dryer lightly.
Becareful not to break the wiring of the home button because it is thin.
[iPhone6 glass replacement, liquid crystal replacement STEP 20]
I was able to remove only the home button than the LCD of the iPhone6.
Fingerprint authentication is on this button, but if you port it to the next LCD panel to use, you will be able to use fingerprint authentication as before.
[iPhone6 glass replacement, liquid crystal replacement STEP 21]
The next step is to remove the large iron plate (heat shield), but remove all screws because they are screwed on the left and right.
There are six screws in total, but please do not lose them because they are quite small.
[iPhone6 glass replacement, liquid crystal replacement STEP 22]
Remove all the screws on the opposite side.
[iPhone6 glass replacement, liquid crystal replacement STEP 23]
I was able to remove the heat shield.
Now that we have removed all the parts for transplantation, we will attach iron plates, home buttons, and cameras to the newly prepared LCD panel.
Once the LCD is ready, the LCD replacement will be completed if you incorporate it back to the iPhone6 body.
Please install the home button carefully even if you want to port the parts to the liquid crystal that you have prepared!
The home button has a fingerprint authentication function, but fingerprint authentication will not be able to be used in the future if you break or fail, in the worst case will require the body replacement in the manufacturer.
[iPhone6 LCD replacement summary]

If you are used to disassembling, the LCD replacement of the iPhone6 will be completed in about 10 minutes, but if you want to disassemble the iPhone for the first time, let's take more than an hour to disassemble.
The parts themselves are much cheaper than before, so it is easier to repair them, but if you fail to a place that has nothing to do with the liquid crystal, it will be more expensive.

モバイルバージョンを終了