Huawei nova lite 2 explodes to the public.
Depending on the specifications, it has become a model that can be purchased cheaply, but it is a very cost-effective model that is equipped with dual camera sores and face recognition function is also equipped.
Recent HUAWEI models have a large LCD and are up to the width of the screen, but I got the impression that it is made to a pretty woodpecker, so nova lite 2 is more reliable to think that it will be scratched in order to disassemble.
What happens to the data when I change the liquid crystal?
Since the data does not disappear if you only change the liquid crystal, it is possible to use nova lite 2 in the data up to now after the liquid crystal exchange.
However, if the decomposition fails, except so.
In addition, if the manufacturer repair, the probability of being erased of the data is high when you issue the repair to the regular store, it is better to check well if you are in trouble if the data is lost.
Tools used for disassembly
[HUAWEI nova lite 2 LCD repair and disassembly method 1]
When replacing the nova lite 2 LCD, the surface and the back side must be disassembled.
When the glass on the surface is peeled off, there is a cable on the back side, and the rear side also needs to be disassembled because the cable is connected to the rear panel side.
It is not very complicated as a structure, but it took quite a while to understand the structure because it seems to be made quite snugly.
In order to have no screws on the exterior part, it is necessary to work with some power.
A strong tape is attached to one lap of the liquid crystal, but the red frame part in particular is stuck tightly.
It is an image that heat is applied with a dryer or a heat gun, etc., and the tape is removed while softening.
[HUAWEI nova lite 2 LCD repair and disassembly method 2]
Heat and pull out with a suction cup.
If the liquid crystal glass is broken, you cannot use a suction cup, so insert a fairly thin object such as a point card or a card into the gap between the glass and the black frame frame.
[HUAWEI nova lite 2 LCD repair and disassembly method 3]
If you can float the glass even a little, it is a good idea to insert a pick etc. in the part.
Starting from the floated part, i will open it little by little, but please be careful not to break or scratch because there is wiring inside the volume part.
[HUAWEI nova lite 2 LCD repair and disassembly method 4]
It is a state that was lifted and opened above the camera side, but you can see that the orange cable is turning around the back side.
[HUAWEI nova lite 2 LCD repair and disassembly method 5]
I just inserted the tool into the gap between the glass and the black frame and peeled off the glass part, but this time I inserted the tool into the gap between the black frame and the main body and removed the liquid crystal.
In the image, soft tools such as picks are inserted, but because force is necessary, the wound is prepared and it has become to this state using a thin iron spatula of the tip.
[HUAWEI nova lite 2 LCD repair and disassembly method 6]
The side side floated when the whole was made to be strained with an iron spatula.
[HUAWEI nova lite 2 LCD repair and disassembly method 7]
When the liquid crystal is lifted, it becomes such a state.
[HUAWEI nova lite 2 LCD repair and disassembly method 8]
The LCD and back cover have been separated, but the fingerprint sensor cable is still connected, so please do not break it!
[HUAWEI nova lite 2 LCD repair and disassembly method 9]
From here on, we will break down the base side, but first turn over the black tape in the image position.
Then, because there is a screw, I will use the Phillips screwdriver.
[HUAWEI nova lite 2 LCD repair and disassembly method 10]
If you peel off all the black tape of the previous, there is a screw on the other side, and there is a white stamp seal, but it is possible to remove it with a screwdriver as it is.
[HUAWEI nova lite 2 LCD repair and disassembly method 11]
If you can remove the screw, you can remove the iron plate, but there are two connectors below.
It is possible to remove it if it is made to lift from the bottom to the top, but please do not remove it with a metal tool.
Let's use a plastic tool etc. because the connector of the battery is not removed yet.
[HUAWEI nova lite 2 LCD repair and disassembly method 12]
This part is where the fingerprint sensor cable on the main body side is connected.
Let's peel off the black tape as before.
[HUAWEI nova lite 2 LCD repair and disassembly method 13]
When the tape is peeled off, there is a screw in the red arrow part, so i will remove the Phillips screwdriver.
Because there is a nail of the metal plate in the blue arrow part, it is possible to remove the plate if it causes it from the screw side to the nail side after removing the screw.
[HUAWEI nova lite 2 LCD repair and disassembly method 14]
There are two connectors under the plate, but it is possible to remove the connector if it is caused from the bottom to the top.
[HUAWEI nova lite 2 LCD repair and disassembly method 15]
It was possible to completely separate the main body and the rear panel, but we will further disassemble the body side from here.
[HUAWEI nova lite 2 LCD repair and disassembly method 16]
It becomes the speaker side under the battery, but because there is a screw in the red circle part, it removes everything.
It is possible to remove the plate by removing the screw.
[HUAWEI nova lite 2 LCD repair and disassembly method 17]
There is a connector under the iron plate, so let's remove it.
Now that you can remove the cable, please keep it.
[HUAWEI nova lite 2 LCD repair and disassembly method 18]
Next, the battery is removed, but it is necessary to disassemble because there is a wiring of the liquid crystal under the battery.
The battery itself is fixed with double-sided tape to the main body, but the work efficiency increases if it peels off while lightly adding the heat of the dryer.
The tool like the image is inserted into a slight gap on the side side, and it is necessary to be careful because the battery deforms if it rubs forcibly.
[HUAWEI nova lite 2 LCD repair and disassembly method 19]
If you lift the battery, you can see that there is wiring.
This wiring becomes a cable that wraps around the back from the liquid crystal, but removing this wiring is the reason to disassemble the main body side.
I think that there are a lot of models of this pattern in the model of recent HUAWEI.
[HUAWEI nova lite 2 LCD repair and disassembly method 20]
The battery was able to be removed from the main body.
If you want to replace the battery, you can complete it by disassembling it so far.
[HUAWEI nova lite 2 LCD repair and disassembly method 21]
The wiring that is lurking under the battery is attached to the main body with light double-sided tape, but it can be easily peeled off with only a finger.
It is OK if you let it pass through the hole as it is.
[HUAWEI nova lite 2 LCD repair and disassembly method 22]
It was possible to separate the liquid crystal and the main body.
In the case of liquid crystal replacement, the work is finished if the newly prepared liquid crystal is replaced and reassembled with the procedure below.
[HUAWEI nova lite 2 decomposition summary]
Unlike the iPhone, repair difficulty seems to be high.
In this decomposition, the liquid crystal part (1 to 4) has been removed first, but there is no problem even if it is 1 to 4 after the decomposition of 5 to 22 first.